[grid@szrac1 grid]$ ./runcluvfy.sh comp nodecon -i eth0 -n szrac1,szrac2 -verbose
Verifying node connectivity
Checking node connectivity...
Checking hosts config file... Node Name Status ------------------------------------ ------------------------ szrac2 passed szrac1 passed
Verification of the hosts config file successful
Interface information for node "szrac2" Name IP Address Subnet Gateway Def. Gateway HW Address MTU ------ --------------- --------------- --------------- --------------- ----------------- ------ eth0 192.168.0.202 192.168.0.0 0.0.0.0 192.168.0.1 08:00:27:AC:2E:55 1500 eth1 10.0.0.202 10.0.0.0 0.0.0.0 192.168.0.1 08:00:27:47:85:E9 1500
Interface information for node "szrac1" Name IP Address Subnet Gateway Def. Gateway HW Address MTU ------ --------------- --------------- --------------- --------------- ----------------- ------ eth0 192.168.0.201 192.168.0.0 0.0.0.0 192.168.0.1 08:00:27:AC:2E:55 1500 eth1 10.0.0.201 10.0.0.0 0.0.0.0 192.168.0.1 08:00:27:47:85:E9 1500
Check: Node connectivity for interface "eth0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- szrac2[192.168.0.202] szrac1[192.168.0.201] yes Result: Node connectivity passed for interface "eth0"
Check: TCP connectivity of subnet "192.168.0.0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- szrac1:192.168.0.201 szrac2:192.168.0.202 passed Result: TCP connectivity check passed for subnet "192.168.0.0"
Checking subnet mask consistency... Subnet mask consistency check passed for subnet "192.168.0.0". Subnet mask consistency check passed for subnet "10.0.0.0". Subnet mask consistency check passed.
Result: Node connectivity check passed
Verification of node connectivity was successful.
|