关于haip的概念,请大家参照百度
我这里场景
rac01,
rac02
私网:
rac01 eth1 180.180.0.1
rac02 eth1 180.180.0.2
现在增加一个新的网卡:
rac01 eth2 180.180.1.1
rac02 eth2 180.180.1.2
和以前的网卡不在一个网络
办法:
1.新增加物理网卡,并设置ip
该操作可以通过os完成.
2.在集群中增加该网卡
# /u01/app/11.2.0/grid/bin/oifcfg setif -global eth2/180.180.1.0:cluster_interconnect
3.增加后,必须关闭两个节点的crs
crsctl stop crs
4.重起两个节点的crs
随便哪个先起都可以
5.检查ip
[root@rac01 ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 9C:8E:99:20:9D:34
inet addr:192.168.10.201 Bcast:192.168.10.255 Mask:255.255.255.0
inet6 addr: fe80::9e8e:99ff:fe20:9d34/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:169679 errors:0 dropped:0 overruns:0 frame:0
TX packets:161306 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:40407183 (38.5 MiB) TX bytes:106788696 (101.8 MiB)
Interrupt:178
eth0:2 Link encap:Ethernet HWaddr 9C:8E:99:20:9D:34
inet addr:192.168.10.100 Bcast:192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:178
eth0:3 Link encap:Ethernet HWaddr 9C:8E:99:20:9D:34
inet addr:192.168.10.101 Bcast:192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:178
eth1 Link encap:Ethernet HWaddr 9C:8E:99:20:9D:35
inet addr:180.180.0.1 Bcast:180.180.0.255 Mask:255.255.255.0
inet6 addr: fe80::9e8e:99ff:fe20:9d35/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2654013 errors:0 dropped:0 overruns:0 frame:0
TX packets:2525436 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3031256170 (2.8 GiB) TX bytes:2818309669 (2.6 GiB)
Interrupt:210
eth1:1 Link encap:Ethernet HWaddr 9C:8E:99:20:9D:35
inet addr:169.254.101.194 Bcast:169.254.127.255 Mask:255.255.128.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:210
eth2 Link encap:Ethernet HWaddr 9C:8E:99:20:9D:36
inet addr:180.180.1.1 Bcast:180.180.1.255 Mask:255.255.255.0
inet6 addr: fe80::9e8e:99ff:fe20:9d36/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1779680 errors:0 dropped:0 overruns:0 frame:0
TX packets:2340639 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1943087116 (1.8 GiB) TX bytes:2706691817 (2.5 GiB)
Interrupt:51
eth2:1 Link encap:Ethernet HWaddr 9C:8E:99:20:9D:36
inet addr:169.254.215.30 Bcast:169.254.255.255 Mask:255.255.128.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:51
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:716349 errors:0 dropped:0 overruns:0 frame:0
TX packets:716349 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:176826698 (168.6 MiB) TX bytes:176826698 (168.6 MiB)
发现已经有了 169.254.215.30
同时,在
1* select * from gv$cluster_interconnects
INST_ID NAME IP_ADDRESS IS_ SOURCE
---------- --------------- ---------------- --- -------------------------------
1 eth1:1 169.254.101.194 NO
1 eth2:1 169.254.215.30 NO
2 eth1:1 169.254.123.21 NO
2 eth2:1 169.254.187.97 NO
在报警文件中,也看到
SMCO started with pid=71, OS id=24187
Sun Jul 10 20:41:44 2016
SKGXP: ospid 22757: network interface with IP address 169.254.101.194 no longer running (check cable)
SKGXP: ospid 22757: network interface with IP address 169.254.215.30 no longer running (check cable)
Sun Jul 10 20:42:46 2016
SKGXP: ospid 22757: network interface with IP address 169.254.101.194 is now running
SKGXP: ospid 22757: network interface with IP address 169.254.215.30 is now running
在$CRS_HOME/agent/ohasd/orarootagent/orarootagent.log
中,也将看到类似的信息.
关于测试,在此掠过.
|