在AIX查找主机光钎卡对应的wwid

5dm

# lscfg -vpl fcs0
  fcs0             U787A.001.DPM2LVP-P1-C4-T1  FC Adapter

        Part Number.................03N6441
        EC Level....................A
        Serial Number...............1D6060844E
        Manufacturer................001D
        Customer Card ID Number.....280B
        FRU Number.................. 03N6441
        Device Specific.(ZM)........3
        Network Address.............10000000C9544909
        ROS Level and ID............0288193D
        Device Specific.(Z0)........1001206D
        Device Specific.(Z1)........00000000
        Device Specific.(Z2)........00000000
        Device Specific.(Z3)........03000909
        Device Specific.(Z4)........FF801412
        Device Specific.(Z5)........0288193D
        Device Specific.(Z6)........0683193D
        Device Specific.(Z7)........0783193D
        Device Specific.(Z8)........20000000C9544909
        Device Specific.(Z9)........TS1.90X13
        Device Specific.(ZA)........T1D1.90X13
        Device Specific.(ZB)........T2D1.90X13
        Device Specific.(ZC)........00000000
        Hardware Location Code......U787A.001.DPM2LVP-P1-C4-T1

  PLATFORM SPECIFIC

  Name:  fibre-channel
    Model:  LP10000
    Node:  fibre-channel@1
    Device Type:  fcp
    Physical Location: U787A.001.DPM2LVP-P1-C4-T1

 

上面红色部分：Network Address.............10000000C9544909
   就是我们要的wwid号，这个wwid主要用在我们存储做zone映射上。

[此贴子已经被作者于2013-1-5 9:59:46编辑过]