ORA-20011 ORA-29913 and ORA-29400 with Associated KUP-XXXXX Errors from DBMS

郑全

ORA-20011 ORA-29913 and ORA-29400 with Associated KUP-XXXXX Errors from DBMS_STATS.GATHER_STATS_JOB (Doc ID 1274653.1)

APPLIES TO:

Oracle Database - Standard Edition - Version 11.2.0.2 and later

Oracle Database - Enterprise Edition - Version 11.2.0.2 and later

Oracle Database - Personal Edition - Version 11.2.0.2 and later

Oracle Database Cloud Schema Service - Version N/A and later

Oracle Database Exadata Cloud Machine - Version N/A and later

Information in this document applies to any platform.

SYMPTOMS

The key symptoms in these cases are typically the following:

DBMS_STATS is being executed in some form

ORA-20011, ORA-29913 and ORA-29400 Errors are seen, ORA-29913 specifying external function "ODCIEXTTABLEOPEN" signifying that there was an error in the callout by the external function "ODCIEXTTABLEOPEN " while trying to open an external table.

Some specific examples follow:

When attempting to run GATHER_STATS_JOB the following errors occur:

ORA-20011: Approximate NDV failed:ORA-29913: error in executing ODCIEXTTABLEOPEN callout

ORA-29400: data cartridge error

usually accompanied with varying other errors such as:

KUP-11024: This external table can only be accessed from within a Data Pump job

and others.

The alert log may also show following errors:

Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x5400000000] [PC:0xFFFFFFFF7CB19EFC, memcpy%sun4u-opl()+236] [flags: 0x0, count: 1]

ERROR: Unable to normalize symbol name for the following short stack (at offset 200):

dbgexProcessError()+176<-dbgePostErrorKGE()+1348<-dbkePostKGE_kgsf()+48<-kgeade()+

NOTE: With cases where the file was not found in the directory specified raising:

KUP-04040: file %s in %s not found

See:

Document 150737.1 ORA-29913, ORA-29400, KUP-04040 While Selecting from External Table

Document 1290722.1 "KUP-04040: file timezdif.csv in TIMEZDIF_DIR not found " logged by GATHER_STATS_JOB in alert.log after upgrade

Document 1305127.1 KUP-04040: file TRCA_CONTROL.txt in TRCA$STAGE not found

Alternatively you may get text in the trace file like:

*** 2012-09-10 05:00:11.921

DBMS_STATS: GATHER_STATS_JOB: GATHER_TABLE_STATS('"SH"','"SALES_TRANSACTIONS_EXT"','""', ...)

DBMS_STATS: ORA-20011: Approximate NDV failed: ORA-29913: error in executing ODCIEXTTABLEOPEN callout

ORA-29400: data cartridge error

error opening file ../demo/schema/log/ext_1v3.log

CHANGES

CAUSE

The primary cause of this issue is that an OS file for an "external table" existed at some point in time but does not now. However, the database still believes the OS file for the table exists since the dictionary information about the object has not been modified to reflect the change. When DBMS_STATS is run against the table in question, it makes a call out to the external table which fails because the object is not there.

There are many reasons that an external table may not exist including:

Temporary Datapump external tables have not been cleaned up properly. The dictionary information should have been dropped when the DataPump jobs completed.

An OS file for an External table has been removed without clearing up the corresponding data dictionary information. For example: Oracle Demo Schema Tables such as the external table “SALES_TRANSACTIONS_EXT” may have been removed but the dictionary has not been updated to reflect this. The "SALES_TRANSACTIONS_EXT" table is an external table in the "SH" schema which is one of Demo Schema provided by Oracle.

SOLUTION

Essentially the solution to this issue is to clean up the orphaned dictionary entries. Different solutions are appropriate dependent on the exact nature of the primary cause and these are outlined below:

Temporary Datapump External Table

Ensure that there are no DataPump jobs running at the same time as the DBMS_STATS job (this is to avoid any potential complications associated with cleaning up at the same time as something else is running).

Check and clean up orphaned DataPump jobs. The following article addresses a case where DBMS_WORKLOAD_CAPTURE does not drop external tables (causing ORA-20011 from DBMS_STATS):

Document 10327346.8 Bug 10327346 - DBMS_WORKLOAD_CAPTURE does not drop external tables (causing ORA-20011 from DBMS_STATS)

Both above steps can be done by following Document:

Document 336014.1 How To Cleanup Orphaned DataPump Jobs In DBA_DATAPUMP_JOBS ?

Identify external tables. To do this, Run the following as SYSDBA in SQL*Plus

spool obj.out

set linesize 200 trimspool on

set pagesize 2000

col owner form a30

col created form a25

col last_ddl_time form a25

col object_name form a30

col object_type form a25

select OWNER,OBJECT_NAME,OBJECT_TYPE, status,

to_char(CREATED,'dd-mon-yyyy hh24:mi:ss') created

,to_char(LAST_DDL_TIME , 'dd-mon-yyyy hh24:mi:ss') last_ddl_time

from dba_objects

where object_name like 'ET$%'

/

select owner, TABLE_NAME, DEFAULT_DIRECTORY_NAME, ACCESS_TYPE

from dba_external_tables

order by 1,2

/

spool off

Correlate the information from DBA_OBJECTS and DBA_EXTERNAL TABLES above to identify the temporary external tables that belong to the DataPump.

Drop the temporary external tables that belong to the DataPump. eg:

SQL> drop table system.&1 purge;

Enter value for 1: ET$00654E1E0001

old 1: drop table system.&1 purge

new 1: drop table system.ET$00654E1E0001 purge

Other External Table

With cases where specific External tables (be they Demo Schema tables or other tables) are missing, the process for handling them is much the same and can be resolved by following the procedures below. For example, if the additional error is 'error opening file ../demo/schema/log/ext_1v3.log', then this indicates that there is a problem opening or locating the log file from the demo schema directory. The implication is that the demo tables have not been cleared up correctly:

Try to locate the files for these tables in their directory.

To confirm if a file is present at the expected location for the external file, the following query might be helpful.

undefine owner

undefine table_pattern

select el.table_name, el.owner, dir.directory_path||'/'||dir.directory_name "path"

from dba_external_locations el

, dba_directories dir

where el.table_name like '%&&table_pattern%'

and el.owner like '%&&owner%'

and el.directory_owner = dir.owner

and el.directory_name = dir.directory_name

order by 1, 2;

It may be that the files still exist but they have just been renamed or re-located. If that is the case you can correct the location to avoid the problem. If the file has been removed then follow either the following steps:

Lock the statistics on these tables by using the following command:

DBMS_STATS.LOCK_TABLE_STATS ('ownname','tabname');

(This step prevents DBMS_STATS from gathering against the missing table)

AND/OR

Remove the dictionary object for the external table.  For example if the os file for the "SALES_TRANSACTIONS_EXT" Demo table is missing you would use :

DROP TABLE SALES_TRANSACTIONS_EXT;

REFERENCES

NOTE:336014.1 - How To Cleanup Orphaned DataPump Jobs In DBA_DATAPUMP_JOBS ?

NOTE:150737.1 - ORA-29913, ORA-29400, KUP-04040 While Selecting from External Table

BUG:9387797 - ORA-20011 / ORA-1870 EXECUTING GATHER_FIXED_OBJECTS_STATS AFTER UPGRADE TO 11.2

NOTE:1305127.1 - KUP-04040: file TRCA_CONTROL.txt in TRCA$STAGE not found

NOTE:1290722.1 - "KUP-04040: file timezdif.csv in TIMEZDIF_DIR not found " Logged by GATHER_STATS_JOB in Alert.log After Upgrade