Patroni 简介
Patroni基于Python开发的模板，结合DCS(例如 ZooKeeper, etcd, Consul )可以定制PostgreSQL⾼可⽤⽅案。Patroni并不是⼀套拿来即⽤的PostgreSQL⾼可⽤组件，涉及较多的配置和定制⼯作。Patroni接管PostgreSQL数据库的启停，同时监控本地的PostgreSQL数据库，并将本地的PostgreSQL数据库信息写⼊DCS。Patroni的主备端是通过是否能获得 leader key 来控制的，获取到了leader key的Patroni为主节点，其它的为备节点。
Etcd 简介
Etcd是⼀款基于Raft算法和协议开发的分布式 key-value 数据库，基于Go语⾔编写，Patroni监控本地的PostgreSQL状态，并将相关信息写⼊Etcd，每个Patroni都能读写Etcd上的key，从⽽获取外地PostgreSQL数据库信息。当Etcd的leader节点不可⽤时，Etcd会⼀致性的选择⼀个合适的节点作为主节点，新的Etcd主节点将获取leader key，因此建议Etcd集群为三个以上且为奇数的节点。⼀个标准的3节点etcd集群，最⼤容许1个节点故障。
本文将引导您完成在CentOS7.9上使用 PostgreSQL14数据库版本从零安装配置高可用Patroni+Etcd集群
环境准备
主机名 IP地址 操作系统版本 数据库版本 patroni版本 etcd版本
node1 192.168.17.20 CentOS7.9 14.9 3.1.0 3.5.9
node2 192.168.17.21 CentOS7.9 14.9 3.1.0 3.5.9
node3 192.168.17.22 CentOS7.9 14.9 3.1.0 3.5.9
下载软件地址
https://ftp.postgresql.org/pub/s ... tgresql-14.9.tar.gz
https://ftp.postgresql.org/pub/r ... -1.rhel7.x86_64.rpm
操作系统准备
安装CentOS7.9这里省略
关闭防火墙
systemctl stop firewalld
systemctl disable firewalld
3台主机都要操作
[root@node1 ~]# systemctl stop firewalld
[root@node1 ~]# systemctl disable firewalld
Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@node1 ~]#
[root@node2 ~]# systemctl stop firewalld
[root@node2 ~]# systemctl disable firewalld
Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@node2 ~]#
[root@node3 ~]# systemctl stop firewalld
[root@node3 ~]# systemctl disable firewalld
Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@node3 ~]#
关闭SELINUX
setenforce 0
sed -ri 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
3台主机都要操作
[root@node1 ~]# setenforce 0
[root@node1 ~]# sed -ri 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
[root@node2 ~]# setenforce 0
[root@node2 ~]# sed -ri 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
[root@node3 ~]# setenforce 0
[root@node3 ~]# sed -ri 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
配置yum源
sudo sed -e 's|^mirrorlist=|#mirrorlist=|g' \
-e 's|^#baseurl=http://mirror.centos.org|baseurl=https://mirrors.tuna.tsinghua.edu.cn|g' \
-i.bak \
/etc/yum.repos.d/CentOS-*.repo
3台主机都要操作
[root@node1 ~]# sudo sed -e 's|^mirrorlist=|#mirrorlist=|g' \
> -e 's|^#baseurl=http://mirror.centos.org|baseurl=https://mirrors.tuna.tsinghua.edu.cn|g' \
> -i.bak \
> /etc/yum.repos.d/CentOS-*.repo
[root@node1 ~]#
[root@node2 ~]# sudo sed -e 's|^mirrorlist=|#mirrorlist=|g' \
> -e 's|^#baseurl=http://mirror.centos.org|baseurl=https://mirrors.tuna.tsinghua.edu.cn|g' \
> -i.bak \
> /etc/yum.repos.d/CentOS-*.repo
[root@node2 ~]#
[root@node3 ~]# sudo sed -e 's|^mirrorlist=|#mirrorlist=|g' \
> -e 's|^#baseurl=http://mirror.centos.org|baseurl=https://mirrors.tuna.tsinghua.edu.cn|g' \
> -i.bak \
> /etc/yum.repos.d/CentOS-*.repo
[root@node3 ~]#
配置时间同步
yum install -y ntpdate
ntpdate time.windows.com && hwclock -w
3台主机都要操作
[root@node1 ~]# yum install -y ntpdate
Loaded plugins: fastestmirror, langpacks
Determining fastest mirrors
base | 3.6 kB 00:00:00
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
(1/2): extras/7/x86_64/primary_db | 250 kB 00:00:00
(2/2): base/7/x86_64/primary_db | 6.1 MB 00:00:00
Package ntpdate-4.2.6p5-29.el7.centos.2.x86_64 already installed and latest version
Nothing to do
[root@node1 ~]# ntpdate time.windows.com && hwclock -w
8 Sep 15:32:30 ntpdate[2130]: adjust time server 52.231.114.183 offset 0.018752 sec
[root@node1 ~]#
[root@node2 ~]# yum install -y ntpdate
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
base | 3.6 kB 00:00:00
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
Package ntpdate-4.2.6p5-29.el7.centos.2.x86_64 already installed and latest version
Nothing to do
[root@node2 ~]# ntpdate time.windows.com && hwclock -w
8 Sep 15:32:30 ntpdate[2290]: step time server 52.231.114.183 offset -0.875401 sec
[root@node2 ~]#
[root@node3 ~]# yum install -y ntpdate
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
base | 3.6 kB 00:00:00
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
Package ntpdate-4.2.6p5-29.el7.centos.2.x86_64 already installed and latest version
Nothing to do
[root@node3 ~]# ntpdate time.windows.com && hwclock -w
8 Sep 15:32:30 ntpdate[2090]: step time server 52.231.114.183 offset -0.770114 sec
[root@node3 ~]#
安装所需依赖的包
yum install -y readline readline-devel zlib zlib-devel gettext gettext-devel openssl openssl-devel pam pam-devel libxml2 libxml2-devel libxslt libxslt-devel perl perl-devel tcl-devel uuid-devel gcc gcc-c++ make flex bison perl-ExtUtils*
3台主机都要操作，操作略
设置hosts文件
cat >> /etc/hosts << EOF
192.168.17.20 node1
192.168.17.21 node2
192.168.17.22 node3
EOF
3台主机都要操作
[root@node1 ~]# cat >> /etc/hosts << EOF
>
> 192.168.17.20 node1
> 192.168.17.21 node2
> 192.168.17.22 node3
>
> EOF
[root@node1 ~]#
[root@node2 ~]# cat >> /etc/hosts << EOF
>
> 192.168.17.20 node1
> 192.168.17.21 node2
> 192.168.17.22 node3
>
> EOF
[root@node2 ~]#
[root@node3 ~]# cat >> /etc/hosts << EOF
>
> 192.168.17.20 node1
> 192.168.17.21 node2
> 192.168.17.22 node3
>
> EOF
[root@node3 ~]#
添加用户
groupadd postgres
useradd -g postgres postgres
echo "postgres"|passwd --stdin postgres
3台主机都要操作
[root@node1 ~]# groupadd postgres
[root@node1 ~]# useradd -g postgres postgres
[root@node1 ~]# echo "postgres"|passwd --stdin postgres
Changing password for user postgres.
passwd: all authentication tokens updated successfully.
[root@node1 ~]#
[root@node2 ~]# groupadd postgres
[root@node2 ~]# useradd -g postgres postgres
[root@node2 ~]# echo "postgres"|passwd --stdin postgres
Changing password for user postgres.
passwd: all authentication tokens updated successfully.
[root@node2 ~]#
[root@node3 ~]# groupadd postgres
[root@node3 ~]# useradd -g postgres postgres
[root@node3 ~]# echo "postgres"|passwd --stdin postgres
Changing password for user postgres.
passwd: all authentication tokens updated successfully.
[root@node3 ~]#
创建目录
mkdir -p /opt/pg14 /opt/pgdata /opt/pgarchive
chown -R postgres:postgres /opt
chmod 0755 /opt/pg14
chmod 0700 /opt/pgdata /opt/pgarchive
3台主机都要操作
[root@node1 ~]# mkdir -p /opt/pg14 /opt/pgdata /opt/pgarchive
[root@node1 ~]# chown -R postgres:postgres /opt
[root@node1 ~]# chmod 0755 /opt/pg14
[root@node1 ~]# chmod 0700 /opt/pgdata /opt/pgarchive
[root@node1 ~]#
[root@node2 ~]# mkdir -p /opt/pg14 /opt/pgdata /opt/pgarchive
[root@node2 ~]# chown -R postgres:postgres /opt
[root@node2 ~]# chmod 0755 /opt/pg14
[root@node2 ~]# chmod 0700 /opt/pgdata /opt/pgarchive
[root@node2 ~]#
[root@node3 ~]# mkdir -p /opt/pg14 /opt/pgdata /opt/pgarchive
[root@node3 ~]# chown -R postgres:postgres /opt
[root@node3 ~]# chmod 0755 /opt/pg14
[root@node3 ~]# chmod 0700 /opt/pgdata /opt/pgarchive
[root@node3 ~]#
源码编译软件
安装PostgreSQL
把软件包postgresql-14.9.tar.gz上传到/home/postgres目录下
su - postgres
tar zxf postgresql-14.9.tar.gz
cd postgresql-14.9/
./configure --prefix=/opt/pg14
gmake world && gmake install-world
ln -s /opt/pg14 /opt/pgsql
3台主机都要操作，操作略
配置环境变量
cd ~
cat >> /home/postgres/.bash_profile <<EOF
#PostgreSQL settings
export PGPORT=5432
export PGUSER=postgres
export PGHOME=/opt/pgsql
export PGDATA=/opt/pgdata
export LD_LIBRARY_PATH=\$PGHOME/lib
export PATH=\$PGHOME/bin:\$PATH
EOF
source /home/postgres/.bash_profile
postgres --version
3台主机都要操作
[postgres@node1 postgresql-14.9]$ cd ~
[postgres@node1 ~]$ cat >> /home/postgres/.bash_profile <<EOF
>
> #PostgreSQL settings
> export PGPORT=5432
> export PGUSER=postgres
> export PGHOME=/opt/pgsql
> export PGDATA=/opt/pgdata
> export LD_LIBRARY_PATH=\$PGHOME/lib
> export PATH=\$PGHOME/bin:\$PATH
>
> EOF
[postgres@node1 ~]$ source /home/postgres/.bash_profile
[postgres@node1 ~]$ postgres --version
postgres (PostgreSQL) 14.9
[postgres@node1 ~]$
[postgres@node2 postgresql-14.9]$ cd ~
[postgres@node2 ~]$ cat >> /home/postgres/.bash_profile <<EOF
>
> #PostgreSQL settings
> export PGPORT=5432
> export PGUSER=postgres
> export PGHOME=/opt/pgsql
> export PGDATA=/opt/pgdata
> export LD_LIBRARY_PATH=\$PGHOME/lib
> export PATH=\$PGHOME/bin:\$PATH
>
> EOF
[postgres@node2 ~]$ source /home/postgres/.bash_profile
[postgres@node2 ~]$ postgres --version
postgres (PostgreSQL) 14.9
[postgres@node2 ~]$
[postgres@node3 postgresql-14.9]$ cd ~
[postgres@node3 ~]$ cat >> /home/postgres/.bash_profile <<EOF
>
> #PostgreSQL settings
> export PGPORT=5432
> export PGUSER=postgres
> export PGHOME=/opt/pgsql
> export PGDATA=/opt/pgdata
> export LD_LIBRARY_PATH=\$PGHOME/lib
> export PATH=\$PGHOME/bin:\$PATH
>
> EOF
[postgres@node3 ~]$ source /home/postgres/.bash_profile
[postgres@node3 ~]$ postgres --version
postgres (PostgreSQL) 14.9
[postgres@node3 ~]$
安装etcd
把软件包etcd-3.5.9-1.rhel7.x86_64.rpm上传到/root目录下
yum install -y etcd-3.5.9-1.rhel7.x86_64.rpm
cd /etc/etcd/
mkdir data
mv etcd.conf etcd.conf.bak
cat >> etcd.conf << EOF
name: etcd1
data-dir: /etc/etcd/data
listen-client-urls: http://0.0.0.0:2379
advertise-client-urls: http://192.168.17.20:2379
listen-peer-urls: http://0.0.0.0:2380
initial-adverties-peer-urls: http://192.168.17.20:2380
initial-cluster: etcd1=http://192.168.17.20:2380,etcd2=http://192.168.17.21:2380,etcd3=http://192.168.17.22:2380
initial-cluster-token: etcd-cluster
initial-cluster-state: new
enable-v2: true
EOF
cat /etc/etcd/etcd.conf
cat >> /etc/systemd/system/etcd.service << EOF
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
[Service]
Type=notify
WorkingDirectory=/etc/etcd
ExecStart=/usr/bin/etcd --config-file /etc/etcd/etcd.conf
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload
systemctl start etcd.service
systemctl status etcd.service
etcdctl member list
etcdctl endpoint status --write-out=table --endpoints=192.168.17.20:2379,192.168.17.21:2379,192.168.17.22:2379
3台主机都要操作，注意etcd.conf每个节点的IP地址和name都要修改
[root@node1 ~]# cd
[root@node1 ~]# yum install -y etcd-3.5.9-1.rhel7.x86_64.rpm
Loaded plugins: fastestmirror, langpacks
Examining etcd-3.5.9-1.rhel7.x86_64.rpm: etcd-3.5.9-1.rhel7.x86_64
Marking etcd-3.5.9-1.rhel7.x86_64.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package etcd.x86_64 0:3.5.9-1.rhel7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================
Installing:
etcd x86_64 3.5.9-1.rhel7 /etcd-3.5.9-1.rhel7.x86_64 51 M
Transaction Summary
====================================================================================================================================
Install 1 Package
Total size: 51 M
Installed size: 51 M
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : etcd-3.5.9-1.rhel7.x86_64 1/1
Verifying : etcd-3.5.9-1.rhel7.x86_64 1/1
Installed:
etcd.x86_64 0:3.5.9-1.rhel7
Complete!
[root@node1 ~]# cd /etc/etcd/
[root@node1 etcd]# mkdir data
[root@node1 etcd]# mv etcd.conf etcd.conf.bak
[root@node1 etcd]# cat >> etcd.conf << EOF
> name: etcd1
> data-dir: /etc/etcd/data
> listen-client-urls: http://0.0.0.0:2379
> advertise-client-urls: http://192.168.17.20:2379
> listen-peer-urls: http://0.0.0.0:2380
> initial-adverties-peer-urls: http://192.168.17.20:2380
> initial-cluster: etcd1=http://192.168.17.20:2380,etcd2=http://192.168.17.21:2380,etcd3=http://192.168.17.22:2380
> initial-cluster-token: etcd-cluster
> initial-cluster-state: new
> enable-v2: true
>
> EOF
[root@node1 etcd]# cat /etc/etcd/etcd.conf
name: etcd1
data-dir: /etc/etcd/data
listen-client-urls: http://0.0.0.0:2379
advertise-client-urls: http://192.168.17.20:2379
listen-peer-urls: http://0.0.0.0:2380
initial-adverties-peer-urls: http://192.168.17.20:2380
initial-cluster: etcd1=http://192.168.17.20:2380,etcd2=http://192.168.17.21:2380,etcd3=http://192.168.17.22:2380
initial-cluster-token: etcd-cluster
initial-cluster-state: new
enable-v2: true
[root@node1 etcd]# cat >> /etc/systemd/system/etcd.service << EOF
> [Unit]
> Description=Etcd Server
> After=network.target
> After=network-online.target
> Wants=network-online.target
>
> [Service]
> Type=notify
> WorkingDirectory=/etc/etcd
> ExecStart=/usr/bin/etcd --config-file /etc/etcd/etcd.conf
> Restart=on-failure
> LimitNOFILE=65536
>
> [Install]
> WantedBy=multi-user.target
>
> EOF
[root@node1 etcd]# systemctl daemon-reload
[root@node1 etcd]# systemctl start etcd.service
[root@node1 etcd]# systemctl status etcd.service
● etcd.service - Etcd Server
Loaded: loaded (/etc/systemd/system/etcd.service; disabled; vendor preset: disabled)
Active: active (running) since Fri 2023-09-08 23:00:28 CST; 1min 39s ago
Main PID: 13019 (etcd)
Tasks: 9
CGroup: /system.slice/etcd.service
└─13019 /usr/bin/etcd --config-file /etc/etcd/etcd.conf
Sep 08 23:01:51 node1 etcd[13019]: {"level":"info","ts":"2023-09-08T23:01:51.717154+0800","caller":"rafthttp/stream.go:274...660b1"}
Sep 08 23:01:51 node1 etcd[13019]: {"level":"info","ts":"2023-09-08T23:01:51.717209+0800","caller":"rafthttp/stream.go:249...pp v2"}
Sep 08 23:01:51 node1 etcd[13019]: {"level":"info","ts":"2023-09-08T23:01:51.717221+0800","caller":"rafthttp/stream.go:274...660b1"}
Sep 08 23:01:51 node1 etcd[13019]: {"level":"info","ts":"2023-09-08T23:01:51.724005+0800","caller":"rafthttp/stream.go:412...660b1"}
Sep 08 23:01:51 node1 etcd[13019]: {"level":"info","ts":"2023-09-08T23:01:51.725469+0800","caller":"rafthttp/stream.go:412...660b1"}
Sep 08 23:01:52 node1 etcd[13019]: {"level":"warn","ts":"2023-09-08T23:01:52.246682+0800","caller":"rafthttp/probing_statu...fused"}
Sep 08 23:01:52 node1 etcd[13019]: {"level":"warn","ts":"2023-09-08T23:01:52.248644+0800","caller":"rafthttp/probing_status.go:68...
Sep 08 23:01:52 node1 etcd[13019]: {"level":"info","ts":"2023-09-08T23:01:52.756795+0800","caller":"etcdserver/server.go:2...:"3.5"}
Sep 08 23:01:52 node1 etcd[13019]: {"level":"info","ts":"2023-09-08T23:01:52.757564+0800","caller":"membership/cluster.go:...:"3.5"}
Sep 08 23:01:52 node1 etcd[13019]: {"level":"info","ts":"2023-09-08T23:01:52.757664+0800","caller":"etcdserver/server.go:2...:"3.5"}
Hint: Some lines were ellipsized, use -l to show in full.
[root@node1 etcd]# etcdctl member list
2babb66633c7e1d8, started, etcd2, http://192.168.17.21:2380, http://192.168.17.21:2379, false
9ca0e7738d03bf5e, started, etcd1, http://192.168.17.20:2380, http://192.168.17.20:2379, false
c33b92e8758660b1, started, etcd3, http://192.168.17.22:2380, http://192.168.17.22:2379, false
[root@node1 etcd]# etcdctl endpoint status --write-out=table --endpoints=192.168.17.20:2379,192.168.17.21:2379,192.168.17.22:2379
+--------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+ --------+
| ENDPOINT | ID | VERSION | DB SIZE | IS LEADER | IS LEARNER | RAFT TERM | RAFT INDEX | RAFT APPLIED INDEX | ERRORS |
+--------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+ --------+
| 192.168.17.20:2379 | 9ca0e7738d03bf5e | 3.5.9 | 20 kB | true | false | 2 | 9 | 9 | |
| 192.168.17.21:2379 | 2babb66633c7e1d8 | 3.5.9 | 20 kB | false | false | 2 | 9 | 9 | |
| 192.168.17.22:2379 | c33b92e8758660b1 | 3.5.9 | 20 kB | false | false | 2 | 9 | 9 | |
+--------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+ --------+
[root@node1 etcd]#
[root@node2 ~]# cd
[root@node2 ~]# yum install -y etcd-3.5.9-1.rhel7.x86_64.rpm
Loaded plugins: fastestmirror, langpacks
Examining etcd-3.5.9-1.rhel7.x86_64.rpm: etcd-3.5.9-1.rhel7.x86_64
Marking etcd-3.5.9-1.rhel7.x86_64.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package etcd.x86_64 0:3.5.9-1.rhel7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================
Installing:
etcd x86_64 3.5.9-1.rhel7 /etcd-3.5.9-1.rhel7.x86_64 51 M
Transaction Summary
====================================================================================================================================
Install 1 Package
Total size: 51 M
Installed size: 51 M
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : etcd-3.5.9-1.rhel7.x86_64 1/1
Verifying : etcd-3.5.9-1.rhel7.x86_64 1/1
Installed:
etcd.x86_64 0:3.5.9-1.rhel7
Complete!
[root@node2 ~]# cd /etc/etcd/
[root@node2 etcd]# mkdir data
[root@node2 etcd]# mv etcd.conf etcd.conf.bak
[root@node2 etcd]# cat >> etcd.conf << EOF
> name: etcd2
> data-dir: /etc/etcd/data
> listen-client-urls: http://0.0.0.0:2379
> advertise-client-urls: http://192.168.17.21:2379
> listen-peer-urls: http://0.0.0.0:2380
> initial-adverties-peer-urls: http://192.168.17.21:2380
> initial-cluster: etcd1=http://192.168.17.20:2380,etcd2=http://192.168.17.21:2380,etcd3=http://192.168.17.22:2380
> initial-cluster-token: etcd-cluster
> initial-cluster-state: new
> enable-v2: true
>
> EOF
[root@node2 etcd]# cat /etc/etcd/etcd.conf
name: etcd2
data-dir: /etc/etcd/data
listen-client-urls: http://0.0.0.0:2379
advertise-client-urls: http://192.168.17.21:2379
listen-peer-urls: http://0.0.0.0:2380
initial-adverties-peer-urls: http://192.168.17.21:2380
initial-cluster: etcd1=http://192.168.17.20:2380,etcd2=http://192.168.17.21:2380,etcd3=http://192.168.17.22:2380
initial-cluster-token: etcd-cluster
initial-cluster-state: new
enable-v2: true
[root@node2 etcd]# cat >> /etc/systemd/system/etcd.service << EOF
> [Unit]
> Description=Etcd Server
> After=network.target
> After=network-online.target
> Wants=network-online.target
>
> [Service]
> Type=notify
> WorkingDirectory=/etc/etcd
> ExecStart=/usr/bin/etcd --config-file /etc/etcd/etcd.conf
> Restart=on-failure
> LimitNOFILE=65536
>
> [Install]
> WantedBy=multi-user.target
>
> EOF
[root@node2 etcd]# systemctl daemon-reload
[root@node2 etcd]# systemctl start etcd.service
[root@node2 etcd]# systemctl status etcd.service
● etcd.service - Etcd Server
Loaded: loaded (/etc/systemd/system/etcd.service; disabled; vendor preset: disabled)
Active: active (running) since Fri 2023-09-08 23:00:28 CST; 1min 39s ago
Main PID: 12938 (etcd)
Tasks: 9
CGroup: /system.slice/etcd.service
└─12938 /usr/bin/etcd --config-file /etc/etcd/etcd.conf
Sep 08 23:01:47 node2 etcd[12938]: {"level":"warn","ts":"2023-09-08T23:01:47.545905+0800","caller":"rafthttp/probing_statu...fused"}
Sep 08 23:01:47 node2 etcd[12938]: {"level":"warn","ts":"2023-09-08T23:01:47.545954+0800","caller":"rafthttp/probing_status.go:68...
Sep 08 23:01:51 node2 etcd[12938]: {"level":"info","ts":"2023-09-08T23:01:51.425378+0800","caller":"rafthttp/stream.go:249...ssage"}
Sep 08 23:01:51 node2 etcd[12938]: {"level":"info","ts":"2023-09-08T23:01:51.425406+0800","caller":"rafthttp/peer_status.g...660b1"}
Sep 08 23:01:51 node2 etcd[12938]: {"level":"info","ts":"2023-09-08T23:01:51.425418+0800","caller":"rafthttp/stream.go:274...660b1"}
Sep 08 23:01:51 node2 etcd[12938]: {"level":"info","ts":"2023-09-08T23:01:51.425462+0800","caller":"rafthttp/stream.go:249...pp v2"}
Sep 08 23:01:51 node2 etcd[12938]: {"level":"info","ts":"2023-09-08T23:01:51.425475+0800","caller":"rafthttp/stream.go:274...660b1"}
Sep 08 23:01:51 node2 etcd[12938]: {"level":"info","ts":"2023-09-08T23:01:51.439767+0800","caller":"rafthttp/stream.go:412...660b1"}
Sep 08 23:01:51 node2 etcd[12938]: {"level":"info","ts":"2023-09-08T23:01:51.439802+0800","caller":"rafthttp/stream.go:412...660b1"}
Sep 08 23:01:52 node2 etcd[12938]: {"level":"info","ts":"2023-09-08T23:01:52.466405+0800","caller":"membership/cluster.go:...:"3.5"}
Hint: Some lines were ellipsized, use -l to show in full.
[root@node2 etcd]# etcdctl member list
2babb66633c7e1d8, started, etcd2, http://192.168.17.21:2380, http://192.168.17.21:2379, false
9ca0e7738d03bf5e, started, etcd1, http://192.168.17.20:2380, http://192.168.17.20:2379, false
c33b92e8758660b1, started, etcd3, http://192.168.17.22:2380, http://192.168.17.22:2379, false
[root@node2 etcd]# etcdctl endpoint status --write-out=table --endpoints=192.168.17.20:2379,192.168.17.21:2379,192.168.17.22:2379
+--------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+ --------+
| ENDPOINT | ID | VERSION | DB SIZE | IS LEADER | IS LEARNER | RAFT TERM | RAFT INDEX | RAFT APPLIED INDEX | ERRORS |
+--------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+ --------+
| 192.168.17.20:2379 | 9ca0e7738d03bf5e | 3.5.9 | 20 kB | true | false | 2 | 9 | 9 | |
| 192.168.17.21:2379 | 2babb66633c7e1d8 | 3.5.9 | 20 kB | false | false | 2 | 9 | 9 | |
| 192.168.17.22:2379 | c33b92e8758660b1 | 3.5.9 | 20 kB | false | false | 2 | 9 | 9 | |
+--------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+ --------+
[root@node2 etcd]#
[root@node3 ~]# cd
[root@node3 ~]# yum install -y etcd-3.5.9-1.rhel7.x86_64.rpm
Loaded plugins: fastestmirror, langpacks
Examining etcd-3.5.9-1.rhel7.x86_64.rpm: etcd-3.5.9-1.rhel7.x86_64
Marking etcd-3.5.9-1.rhel7.x86_64.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package etcd.x86_64 0:3.5.9-1.rhel7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================
Installing:
etcd x86_64 3.5.9-1.rhel7 /etcd-3.5.9-1.rhel7.x86_64 51 M
Transaction Summary
====================================================================================================================================
Install 1 Package
Total size: 51 M
Installed size: 51 M
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : etcd-3.5.9-1.rhel7.x86_64 1/1
Verifying : etcd-3.5.9-1.rhel7.x86_64 1/1
Installed:
etcd.x86_64 0:3.5.9-1.rhel7
Complete!
[root@node3 ~]# cd /etc/etcd/
[root@node3 etcd]# mkdir data
[root@node3 etcd]# mv etcd.conf etcd.conf.bak
[root@node3 etcd]# cat >> etcd.conf << EOF
> name: etcd3
> data-dir: /etc/etcd/data
> listen-client-urls: http://0.0.0.0:2379
> advertise-client-urls: http://192.168.17.22:2379
> listen-peer-urls: http://0.0.0.0:2380
> initial-adverties-peer-urls: http://192.168.17.22:2380
> initial-cluster: etcd1=http://192.168.17.20:2380,etcd2=http://192.168.17.21:2380,etcd3=http://192.168.17.22:2380
> initial-cluster-token: etcd-cluster
> initial-cluster-state: new
> enable-v2: true
>
> EOF
[root@node3 etcd]# cat /etc/etcd/etcd.conf
name: etcd3
data-dir: /etc/etcd/data
listen-client-urls: http://0.0.0.0:2379
advertise-client-urls: http://192.168.17.22:2379
listen-peer-urls: http://0.0.0.0:2380
initial-adverties-peer-urls: http://192.168.17.22:2380
initial-cluster: etcd1=http://192.168.17.20:2380,etcd2=http://192.168.17.21:2380,etcd3=http://192.168.17.22:2380
initial-cluster-token: etcd-cluster
initial-cluster-state: new
enable-v2: true
[root@node3 etcd]# cat >> /etc/systemd/system/etcd.service << EOF
> [Unit]
> Description=Etcd Server
> After=network.target
> After=network-online.target
> Wants=network-online.target
>
> [Service]
> Type=notify
> WorkingDirectory=/etc/etcd
> ExecStart=/usr/bin/etcd --config-file /etc/etcd/etcd.conf
> Restart=on-failure
> LimitNOFILE=65536
>
> [Install]
> WantedBy=multi-user.target
>
> EOF
[root@node3 etcd]# systemctl daemon-reload
[root@node3 etcd]# systemctl start etcd.service
[root@node3 etcd]# systemctl status etcd.service
● etcd.service - Etcd Server
Loaded: loaded (/etc/systemd/system/etcd.service; disabled; vendor preset: disabled)
Active: active (running) since Fri 2023-09-08 23:01:51 CST; 16s ago
Main PID: 12980 (etcd)
Tasks: 9
CGroup: /system.slice/etcd.service
└─12980 /usr/bin/etcd --config-file /etc/etcd/etcd.conf
Sep 08 23:01:51 node3 etcd[12980]: {"level":"info","ts":"2023-09-08T23:01:51.462193+0800","caller":"rafthttp/stream.go:249...pp v2"}
Sep 08 23:01:51 node3 etcd[12980]: {"level":"info","ts":"2023-09-08T23:01:51.462219+0800","caller":"rafthttp/stream.go:274...3bf5e"}
Sep 08 23:01:51 node3 etcd[12980]: {"level":"info","ts":"2023-09-08T23:01:51.46221+0800","caller":"rafthttp/stream.go:249"...ssage"}
Sep 08 23:01:51 node3 etcd[12980]: {"level":"info","ts":"2023-09-08T23:01:51.462251+0800","caller":"rafthttp/stream.go:274...3bf5e"}
Sep 08 23:01:51 node3 etcd[12980]: {"level":"info","ts":"2023-09-08T23:01:51.469227+0800","caller":"rafthttp/stream.go:249...pp v2"}
Sep 08 23:01:51 node3 etcd[12980]: {"level":"info","ts":"2023-09-08T23:01:51.469255+0800","caller":"rafthttp/stream.go:274...7e1d8"}
Sep 08 23:01:51 node3 etcd[12980]: {"level":"info","ts":"2023-09-08T23:01:51.469234+0800","caller":"rafthttp/stream.go:249...ssage"}
Sep 08 23:01:51 node3 etcd[12980]: {"level":"info","ts":"2023-09-08T23:01:51.469267+0800","caller":"rafthttp/stream.go:274...7e1d8"}
Sep 08 23:01:51 node3 etcd[12980]: {"level":"info","ts":"2023-09-08T23:01:51.507705+0800","caller":"etcdserver/server.go:777","ms...
Sep 08 23:01:52 node3 etcd[12980]: {"level":"info","ts":"2023-09-08T23:01:52.49601+0800","caller":"membership/cluster.go:5...:"3.5"}
Hint: Some lines were ellipsized, use -l to show in full.
[root@node3 etcd]# etcdctl member list
2babb66633c7e1d8, started, etcd2, http://192.168.17.21:2380, http://192.168.17.21:2379, false
9ca0e7738d03bf5e, started, etcd1, http://192.168.17.20:2380, http://192.168.17.20:2379, false
c33b92e8758660b1, started, etcd3, http://192.168.17.22:2380, http://192.168.17.22:2379, false
[root@node3 etcd]# etcdctl endpoint status --write-out=table --endpoints=192.168.17.20:2379,192.168.17.21:2379,192.168.17.22:2379
+--------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+ --------+
| ENDPOINT | ID | VERSION | DB SIZE | IS LEADER | IS LEARNER | RAFT TERM | RAFT INDEX | RAFT APPLIED INDEX | ERRORS |
+--------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+ --------+
| 192.168.17.20:2379 | 9ca0e7738d03bf5e | 3.5.9 | 20 kB | true | false | 2 | 9 | 9 | |
| 192.168.17.21:2379 | 2babb66633c7e1d8 | 3.5.9 | 20 kB | false | false | 2 | 9 | 9 | |
| 192.168.17.22:2379 | c33b92e8758660b1 | 3.5.9 | 20 kB | false | false | 2 | 9 | 9 | |
+--------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+ --------+
[root@node3 etcd]#
安装watchdog
yum install -y watchdog
sed -ri 's/#watchdog-device/watchdog-device/' /etc/watchdog.conf
mknod /dev/watchdog c 10 130
modprobe softdog
chown postgres /dev/watchdog
3台主机都要操作
[root@node1 etcd]# yum install -y watchdog
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package watchdog.x86_64 0:5.13-12.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================
Installing:
watchdog x86_64 5.13-12.el7 base 79 k
Transaction Summary
====================================================================================================================================
Install 1 Package
Total download size: 79 k
Installed size: 160 k
Downloading packages:
watchdog-5.13-12.el7.x86_64.rpm | 79 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : watchdog-5.13-12.el7.x86_64 1/1
Verifying : watchdog-5.13-12.el7.x86_64 1/1
Installed:
watchdog.x86_64 0:5.13-12.el7
Complete!
[root@node1 etcd]# sed -ri 's/#watchdog-device/watchdog-device/' /etc/watchdog.conf
[root@node1 etcd]# mknod /dev/watchdog c 10 130
[root@node1 etcd]# modprobe softdog
[root@node1 etcd]# chown postgres /dev/watchdog
[root@node1 etcd]#
[root@node2 etcd]# yum install -y watchdog
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package watchdog.x86_64 0:5.13-12.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================
Installing:
watchdog x86_64 5.13-12.el7 base 79 k
Transaction Summary
====================================================================================================================================
Install 1 Package
Total download size: 79 k
Installed size: 160 k
Downloading packages:
watchdog-5.13-12.el7.x86_64.rpm | 79 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : watchdog-5.13-12.el7.x86_64 1/1
Verifying : watchdog-5.13-12.el7.x86_64 1/1
Installed:
watchdog.x86_64 0:5.13-12.el7
Complete!
[root@node2 etcd]# sed -ri 's/#watchdog-device/watchdog-device/' /etc/watchdog.conf
[root@node2 etcd]# mknod /dev/watchdog c 10 130
[root@node2 etcd]# modprobe softdog
[root@node2 etcd]# chown postgres /dev/watchdog
[root@node2 etcd]#
[root@node3 etcd]# yum install -y watchdog
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package watchdog.x86_64 0:5.13-12.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================
Installing:
watchdog x86_64 5.13-12.el7 base 79 k
Transaction Summary
====================================================================================================================================
Install 1 Package
Total download size: 79 k
Installed size: 160 k
Downloading packages:
watchdog-5.13-12.el7.x86_64.rpm | 79 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : watchdog-5.13-12.el7.x86_64 1/1
Verifying : watchdog-5.13-12.el7.x86_64 1/1
Installed:
watchdog.x86_64 0:5.13-12.el7
Complete!
[root@node3 etcd]# sed -ri 's/#watchdog-device/watchdog-device/' /etc/watchdog.conf
[root@node3 etcd]# mknod /dev/watchdog c 10 130
[root@node3 etcd]# modprobe softdog
[root@node3 etcd]# chown postgres /dev/watchdog
[root@node3 etcd]#
安装patroni
yum install -y python3 python3-devel python3-pip gcc libpq-devel
export PGPORT=5432
export PGUSER=postgres
export PGHOME=/opt/pgsql
export PGDATA=/opt/pgdata
export LD_LIBRARY_PATH=$PGHOME/lib
export PATH=$PGHOME/bin:$PATH
pip3 install patroni[etcd]
pip3 install psycopg2-binary
3台主机都要操作
[root@node1 etcd]# yum install -y python3 python3-devel python3-pip gcc libpq-devel
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Package gcc-4.8.5-44.el7.x86_64 already installed and latest version
No package libpq-devel available.
Resolving Dependencies
--> Running transaction check
---> Package python3.x86_64 0:3.6.8-19.el7_9 will be installed
--> Processing Dependency: python3-libs(x86-64) = 3.6.8-19.el7_9 for package: python3-3.6.8-19.el7_9.x86_64
--> Processing Dependency: python3-setuptools for package: python3-3.6.8-19.el7_9.x86_64
--> Processing Dependency: libpython3.6m.so.1.0()(64bit) for package: python3-3.6.8-19.el7_9.x86_64
---> Package python3-devel.x86_64 0:3.6.8-19.el7_9 will be installed
--> Processing Dependency: redhat-rpm-config for package: python3-devel-3.6.8-19.el7_9.x86_64
--> Processing Dependency: python3-rpm-macros for package: python3-devel-3.6.8-19.el7_9.x86_64
--> Processing Dependency: python3-rpm-generators for package: python3-devel-3.6.8-19.el7_9.x86_64
--> Processing Dependency: python-rpm-macros for package: python3-devel-3.6.8-19.el7_9.x86_64
---> Package python3-pip.noarch 0:9.0.3-8.el7 will be installed
--> Running transaction check
---> Package python-rpm-macros.noarch 0:3-34.el7 will be installed
--> Processing Dependency: python-srpm-macros for package: python-rpm-macros-3-34.el7.noarch
---> Package python3-libs.x86_64 0:3.6.8-19.el7_9 will be installed
---> Package python3-rpm-generators.noarch 0:6-2.el7 will be installed
---> Package python3-rpm-macros.noarch 0:3-34.el7 will be installed
---> Package python3-setuptools.noarch 0:39.2.0-10.el7 will be installed
---> Package redhat-rpm-config.noarch 0:9.1.0-88.el7.centos will be installed
--> Processing Dependency: dwz >= 0.4 for package: redhat-rpm-config-9.1.0-88.el7.centos.noarch
--> Processing Dependency: perl-srpm-macros for package: redhat-rpm-config-9.1.0-88.el7.centos.noarch
--> Running transaction check
---> Package dwz.x86_64 0:0.11-3.el7 will be installed
---> Package perl-srpm-macros.noarch 0:1-8.el7 will be installed
---> Package python-srpm-macros.noarch 0:3-34.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================
Installing:
python3 x86_64 3.6.8-19.el7_9 updates 70 k
python3-devel x86_64 3.6.8-19.el7_9 updates 217 k
python3-pip noarch 9.0.3-8.el7 base 1.6 M
Installing for dependencies:
dwz x86_64 0.11-3.el7 base 99 k
perl-srpm-macros noarch 1-8.el7 base 4.6 k
python-rpm-macros noarch 3-34.el7 base 9.1 k
python-srpm-macros noarch 3-34.el7 base 8.8 k
python3-libs x86_64 3.6.8-19.el7_9 updates 6.9 M
python3-rpm-generators noarch 6-2.el7 base 20 k
python3-rpm-macros noarch 3-34.el7 base 8.1 k
python3-setuptools noarch 39.2.0-10.el7 base 629 k
redhat-rpm-config noarch 9.1.0-88.el7.centos base 81 k
Transaction Summary
====================================================================================================================================
Install 3 Packages (+9 Dependent packages)
Total download size: 9.7 M
Installed size: 48 M
Downloading packages:
(1/12): perl-srpm-macros-1-8.el7.noarch.rpm | 4.6 kB 00:00:00
(2/12): python-rpm-macros-3-34.el7.noarch.rpm | 9.1 kB 00:00:00
(3/12): dwz-0.11-3.el7.x86_64.rpm | 99 kB 00:00:00
(4/12): python-srpm-macros-3-34.el7.noarch.rpm | 8.8 kB 00:00:00
(5/12): python3-3.6.8-19.el7_9.x86_64.rpm | 70 kB 00:00:00
(6/12): python3-devel-3.6.8-19.el7_9.x86_64.rpm | 217 kB 00:00:00
(7/12): python3-libs-3.6.8-19.el7_9.x86_64.rpm | 6.9 MB 00:00:00
(8/12): python3-rpm-generators-6-2.el7.noarch.rpm | 20 kB 00:00:00
(9/12): python3-rpm-macros-3-34.el7.noarch.rpm | 8.1 kB 00:00:00
(10/12): python3-pip-9.0.3-8.el7.noarch.rpm | 1.6 MB 00:00:00
(11/12): python3-setuptools-39.2.0-10.el7.noarch.rpm | 629 kB 00:00:00
(12/12): redhat-rpm-config-9.1.0-88.el7.centos.noarch.rpm | 81 kB 00:00:00
------------------------------------------------------------------------------------------------------------------------------------
Total 5.6 MB/s | 9.7 MB 00:00:01
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : python3-setuptools-39.2.0-10.el7.noarch 1/12
Installing : python3-pip-9.0.3-8.el7.noarch 2/12
Installing : python3-libs-3.6.8-19.el7_9.x86_64 3/12
Installing : python3-3.6.8-19.el7_9.x86_64 4/12
Installing : python-srpm-macros-3-34.el7.noarch 5/12
Installing : python-rpm-macros-3-34.el7.noarch 6/12
Installing : python3-rpm-generators-6-2.el7.noarch 7/12
Installing : python3-rpm-macros-3-34.el7.noarch 8/12
Installing : dwz-0.11-3.el7.x86_64 9/12
Installing : perl-srpm-macros-1-8.el7.noarch 10/12
Installing : redhat-rpm-config-9.1.0-88.el7.centos.noarch 11/12
Installing : python3-devel-3.6.8-19.el7_9.x86_64 12/12
Verifying : python3-devel-3.6.8-19.el7_9.x86_64 1/12
Verifying : python3-rpm-generators-6-2.el7.noarch 2/12
Verifying : perl-srpm-macros-1-8.el7.noarch 3/12
Verifying : python3-3.6.8-19.el7_9.x86_64 4/12
Verifying : python-rpm-macros-3-34.el7.noarch 5/12
Verifying : dwz-0.11-3.el7.x86_64 6/12
Verifying : python3-rpm-macros-3-34.el7.noarch 7/12
Verifying : python3-setuptools-39.2.0-10.el7.noarch 8/12
Verifying : python3-pip-9.0.3-8.el7.noarch 9/12
Verifying : python-srpm-macros-3-34.el7.noarch 10/12
Verifying : python3-libs-3.6.8-19.el7_9.x86_64 11/12
Verifying : redhat-rpm-config-9.1.0-88.el7.centos.noarch 12/12
Installed:
python3.x86_64 0:3.6.8-19.el7_9 python3-devel.x86_64 0:3.6.8-19.el7_9 python3-pip.noarch 0:9.0.3-8.el7
Dependency Installed:
dwz.x86_64 0:0.11-3.el7 perl-srpm-macros.noarch 0:1-8.el7 python-rpm-macros.noarch 0:3-34.el7
python-srpm-macros.noarch 0:3-34.el7 python3-libs.x86_64 0:3.6.8-19.el7_9 python3-rpm-generators.noarch 0:6-2.el7
python3-rpm-macros.noarch 0:3-34.el7 python3-setuptools.noarch 0:39.2.0-10.el7 redhat-rpm-config.noarch 0:9.1.0-88.el7.centos
Complete!
[root@node1 etcd]# echo $LD_LIBRARY_PATH
[root@node1 etcd]# export PGPORT=5432
[root@node1 etcd]# export PGUSER=postgres
[root@node1 etcd]# export PGHOME=/opt/pgsql
[root@node1 etcd]# export PGDATA=/opt/pgdata
[root@node1 etcd]# export LD_LIBRARY_PATH=$PGHOME/lib
[root@node1 etcd]# export PATH=$PGHOME/bin:$PATH
[root@node1 etcd]# pip3 install patroni[etcd]
WARNING: Running pip install with root privileges is generally not a good idea. Try `pip3 install --user` instead.
Collecting patroni[etcd]
Downloading https://files.pythonhosted.org/p ... d49f714/patroni-3.1 .0-py3-none-any.whl (286kB)
100% |████████████████████████████████| 286kB 832kB/s
Collecting ydiff>=1.2.0 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 583fce4/ydiff-1.2.t ar.gz (42kB)
100% |████████████████████████████████| 51kB 427kB/s
Collecting PyYAML (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... be1eda0/PyYAML-6.0. 1.tar.gz (125kB)
100% |████████████████████████████████| 133kB 614kB/s
Collecting prettytable>=0.7 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 6168b4c/prettytable -2.5.0-py3-none-any.whl
Collecting urllib3!=1.21,>=1.19.1 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 7728471/urllib3-1.2 6.16-py2.py3-none-any.whl (143kB)
100% |████████████████████████████████| 143kB 566kB/s
Collecting python-dateutil (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 342a56d/python_date util-2.8.2-py2.py3-none-any.whl (247kB)
100% |████████████████████████████████| 256kB 450kB/s
Collecting click>=4.1 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 1696d7d/click-8.0.4 -py3-none-any.whl (97kB)
100% |████████████████████████████████| 102kB 459kB/s
Collecting psutil>=2.0.0 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... cfc2c07/psutil-5.9. 5.tar.gz (493kB)
100% |████████████████████████████████| 501kB 486kB/s
Collecting python-etcd<0.5,>=0.4.3; extra == "etcd" (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 821ab41/python-etcd -0.4.5.tar.gz
Collecting wcwidth (from prettytable>=0.7->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... aa83f11/wcwidth-0.2 .6-py2.py3-none-any.whl
Collecting importlib-metadata; python_version < "3.8" (from prettytable>=0.7->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... d68f4ce/importlib_m etadata-4.8.3-py3-none-any.whl
Collecting six>=1.5 (from python-dateutil->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 91daf11/six-1.16.0- py2.py3-none-any.whl
Collecting dnspython>=1.13.0 (from python-etcd<0.5,>=0.4.3; extra == "etcd"->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 337cc35/dnspython-2 .2.1-py3-none-any.whl (269kB)
100% |████████████████████████████████| 276kB 454kB/s
Collecting typing-extensions>=3.6.4; python_version < "3.8" (from importlib-metadata; python_version < "3.8"->prettytable>=0.7->patr oni[etcd])
Downloading https://files.pythonhosted.org/p ... ffd3a0e/typing_exte nsions-4.1.1-py3-none-any.whl
Collecting zipp>=0.5 (from importlib-metadata; python_version < "3.8"->prettytable>=0.7->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 6f8e8ad/zipp-3.6.0- py3-none-any.whl
Installing collected packages: ydiff, PyYAML, wcwidth, typing-extensions, zipp, importlib-metadata, prettytable, urllib3, six, pytho n-dateutil, click, psutil, dnspython, python-etcd, patroni
Running setup.py install for ydiff ... done
Running setup.py install for PyYAML ... done
Running setup.py install for psutil ... done
Running setup.py install for python-etcd ... done
Successfully installed PyYAML-6.0.1 click-8.0.4 dnspython-2.2.1 importlib-metadata-4.8.3 patroni-3.1.0 prettytable-2.5.0 psutil-5.9. 5 python-dateutil-2.8.2 python-etcd-0.4.5 six-1.16.0 typing-extensions-4.1.1 urllib3-1.26.16 wcwidth-0.2.6 ydiff-1.2 zipp-3.6.0
[root@node1 etcd]# pip3 install psycopg2-binary
WARNING: Running pip install with root privileges is generally not a good idea. Try `pip3 install --user` instead.
Collecting psycopg2-binary
Downloading https://files.pythonhosted.org/p ... 3a1a29f/psycopg2-bi nary-2.9.7.tar.gz (383kB)
100% |████████████████████████████████| 389kB 876kB/s
Installing collected packages: psycopg2-binary
Running setup.py install for psycopg2-binary ... done
Successfully installed psycopg2-binary-2.9.7
[root@node1 etcd]#
[root@node2 etcd]# yum install -y python3 python3-devel python3-pip gcc libpq-devel
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Package gcc-4.8.5-44.el7.x86_64 already installed and latest version
No package libpq-devel available.
Resolving Dependencies
--> Running transaction check
---> Package python3.x86_64 0:3.6.8-19.el7_9 will be installed
--> Processing Dependency: python3-libs(x86-64) = 3.6.8-19.el7_9 for package: python3-3.6.8-19.el7_9.x86_64
--> Processing Dependency: python3-setuptools for package: python3-3.6.8-19.el7_9.x86_64
--> Processing Dependency: libpython3.6m.so.1.0()(64bit) for package: python3-3.6.8-19.el7_9.x86_64
---> Package python3-devel.x86_64 0:3.6.8-19.el7_9 will be installed
--> Processing Dependency: redhat-rpm-config for package: python3-devel-3.6.8-19.el7_9.x86_64
--> Processing Dependency: python3-rpm-macros for package: python3-devel-3.6.8-19.el7_9.x86_64
--> Processing Dependency: python3-rpm-generators for package: python3-devel-3.6.8-19.el7_9.x86_64
--> Processing Dependency: python-rpm-macros for package: python3-devel-3.6.8-19.el7_9.x86_64
---> Package python3-pip.noarch 0:9.0.3-8.el7 will be installed
--> Running transaction check
---> Package python-rpm-macros.noarch 0:3-34.el7 will be installed
--> Processing Dependency: python-srpm-macros for package: python-rpm-macros-3-34.el7.noarch
---> Package python3-libs.x86_64 0:3.6.8-19.el7_9 will be installed
---> Package python3-rpm-generators.noarch 0:6-2.el7 will be installed
---> Package python3-rpm-macros.noarch 0:3-34.el7 will be installed
---> Package python3-setuptools.noarch 0:39.2.0-10.el7 will be installed
---> Package redhat-rpm-config.noarch 0:9.1.0-88.el7.centos will be installed
--> Processing Dependency: dwz >= 0.4 for package: redhat-rpm-config-9.1.0-88.el7.centos.noarch
--> Processing Dependency: perl-srpm-macros for package: redhat-rpm-config-9.1.0-88.el7.centos.noarch
--> Running transaction check
---> Package dwz.x86_64 0:0.11-3.el7 will be installed
---> Package perl-srpm-macros.noarch 0:1-8.el7 will be installed
---> Package python-srpm-macros.noarch 0:3-34.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================
Installing:
python3 x86_64 3.6.8-19.el7_9 updates 70 k
python3-devel x86_64 3.6.8-19.el7_9 updates 217 k
python3-pip noarch 9.0.3-8.el7 base 1.6 M
Installing for dependencies:
dwz x86_64 0.11-3.el7 base 99 k
perl-srpm-macros noarch 1-8.el7 base 4.6 k
python-rpm-macros noarch 3-34.el7 base 9.1 k
python-srpm-macros noarch 3-34.el7 base 8.8 k
python3-libs x86_64 3.6.8-19.el7_9 updates 6.9 M
python3-rpm-generators noarch 6-2.el7 base 20 k
python3-rpm-macros noarch 3-34.el7 base 8.1 k
python3-setuptools noarch 39.2.0-10.el7 base 629 k
redhat-rpm-config noarch 9.1.0-88.el7.centos base 81 k
Transaction Summary
====================================================================================================================================
Install 3 Packages (+9 Dependent packages)
Total download size: 9.7 M
Installed size: 48 M
Downloading packages:
(1/12): perl-srpm-macros-1-8.el7.noarch.rpm | 4.6 kB 00:00:00
(2/12): python-rpm-macros-3-34.el7.noarch.rpm | 9.1 kB 00:00:00
(3/12): dwz-0.11-3.el7.x86_64.rpm | 99 kB 00:00:00
(4/12): python-srpm-macros-3-34.el7.noarch.rpm | 8.8 kB 00:00:00
(5/12): python3-3.6.8-19.el7_9.x86_64.rpm | 70 kB 00:00:00
(6/12): python3-devel-3.6.8-19.el7_9.x86_64.rpm | 217 kB 00:00:00
(7/12): python3-rpm-generators-6-2.el7.noarch.rpm | 20 kB 00:00:00
(8/12): python3-libs-3.6.8-19.el7_9.x86_64.rpm | 6.9 MB 00:00:00
(9/12): python3-rpm-macros-3-34.el7.noarch.rpm | 8.1 kB 00:00:00
(10/12): python3-setuptools-39.2.0-10.el7.noarch.rpm | 629 kB 00:00:00
(11/12): python3-pip-9.0.3-8.el7.noarch.rpm | 1.6 MB 00:00:00
(12/12): redhat-rpm-config-9.1.0-88.el7.centos.noarch.rpm | 81 kB 00:00:00
------------------------------------------------------------------------------------------------------------------------------------
Total 6.2 MB/s | 9.7 MB 00:00:01
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : python3-setuptools-39.2.0-10.el7.noarch 1/12
Installing : python3-pip-9.0.3-8.el7.noarch 2/12
Installing : python3-libs-3.6.8-19.el7_9.x86_64 3/12
Installing : python3-3.6.8-19.el7_9.x86_64 4/12
Installing : python-srpm-macros-3-34.el7.noarch 5/12
Installing : python-rpm-macros-3-34.el7.noarch 6/12
Installing : python3-rpm-generators-6-2.el7.noarch 7/12
Installing : python3-rpm-macros-3-34.el7.noarch 8/12
Installing : dwz-0.11-3.el7.x86_64 9/12
Installing : perl-srpm-macros-1-8.el7.noarch 10/12
Installing : redhat-rpm-config-9.1.0-88.el7.centos.noarch 11/12
Installing : python3-devel-3.6.8-19.el7_9.x86_64 12/12
Verifying : python3-devel-3.6.8-19.el7_9.x86_64 1/12
Verifying : python3-rpm-generators-6-2.el7.noarch 2/12
Verifying : perl-srpm-macros-1-8.el7.noarch 3/12
Verifying : python3-3.6.8-19.el7_9.x86_64 4/12
Verifying : python-rpm-macros-3-34.el7.noarch 5/12
Verifying : dwz-0.11-3.el7.x86_64 6/12
Verifying : python3-rpm-macros-3-34.el7.noarch 7/12
Verifying : python3-setuptools-39.2.0-10.el7.noarch 8/12
Verifying : python3-pip-9.0.3-8.el7.noarch 9/12
Verifying : python-srpm-macros-3-34.el7.noarch 10/12
Verifying : python3-libs-3.6.8-19.el7_9.x86_64 11/12
Verifying : redhat-rpm-config-9.1.0-88.el7.centos.noarch 12/12
Installed:
python3.x86_64 0:3.6.8-19.el7_9 python3-devel.x86_64 0:3.6.8-19.el7_9 python3-pip.noarch 0:9.0.3-8.el7
Dependency Installed:
dwz.x86_64 0:0.11-3.el7 perl-srpm-macros.noarch 0:1-8.el7 python-rpm-macros.noarch 0:3-34.el7
python-srpm-macros.noarch 0:3-34.el7 python3-libs.x86_64 0:3.6.8-19.el7_9 python3-rpm-generators.noarch 0:6-2.el7
python3-rpm-macros.noarch 0:3-34.el7 python3-setuptools.noarch 0:39.2.0-10.el7 redhat-rpm-config.noarch 0:9.1.0-88.el7.centos
Complete!
[root@node2 etcd]# echo $LD_LIBRARY_PATH
[root@node2 etcd]# export PGPORT=5432
[root@node2 etcd]# export PGUSER=postgres
[root@node2 etcd]# export PGHOME=/opt/pgsql
[root@node2 etcd]# export PGDATA=/opt/pgdata
[root@node2 etcd]# export LD_LIBRARY_PATH=$PGHOME/lib
[root@node2 etcd]# export PATH=$PGHOME/bin:$PATH
[root@node2 etcd]# pip3 install patroni[etcd]
WARNING: Running pip install with root privileges is generally not a good idea. Try `pip3 install --user` instead.
Collecting patroni[etcd]
Downloading https://files.pythonhosted.org/p ... d49f714/patroni-3.1 .0-py3-none-any.whl (286kB)
100% |████████████████████████████████| 286kB 389kB/s
Collecting prettytable>=0.7 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 6168b4c/prettytable -2.5.0-py3-none-any.whl
Collecting python-dateutil (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 342a56d/python_date util-2.8.2-py2.py3-none-any.whl (247kB)
100% |████████████████████████████████| 256kB 906kB/s
Collecting ydiff>=1.2.0 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 583fce4/ydiff-1.2.t ar.gz (42kB)
100% |████████████████████████████████| 51kB 1.2MB/s
Collecting click>=4.1 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 1696d7d/click-8.0.4 -py3-none-any.whl (97kB)
100% |████████████████████████████████| 102kB 721kB/s
Collecting psutil>=2.0.0 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... cfc2c07/psutil-5.9. 5.tar.gz (493kB)
100% |████████████████████████████████| 501kB 702kB/s
Collecting urllib3!=1.21,>=1.19.1 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 7728471/urllib3-1.2 6.16-py2.py3-none-any.whl (143kB)
100% |████████████████████████████████| 143kB 693kB/s
Collecting PyYAML (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... be1eda0/PyYAML-6.0. 1.tar.gz (125kB)
100% |████████████████████████████████| 133kB 578kB/s
Collecting python-etcd<0.5,>=0.4.3; extra == "etcd" (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 821ab41/python-etcd -0.4.5.tar.gz
Collecting wcwidth (from prettytable>=0.7->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... aa83f11/wcwidth-0.2 .6-py2.py3-none-any.whl
Collecting importlib-metadata; python_version < "3.8" (from prettytable>=0.7->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... d68f4ce/importlib_m etadata-4.8.3-py3-none-any.whl
Collecting six>=1.5 (from python-dateutil->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 91daf11/six-1.16.0- py2.py3-none-any.whl
Collecting dnspython>=1.13.0 (from python-etcd<0.5,>=0.4.3; extra == "etcd"->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 337cc35/dnspython-2 .2.1-py3-none-any.whl (269kB)
100% |████████████████████████████████| 276kB 256kB/s
Collecting typing-extensions>=3.6.4; python_version < "3.8" (from importlib-metadata; python_version < "3.8"->prettytable>=0.7->patr oni[etcd])
Downloading https://files.pythonhosted.org/p ... ffd3a0e/typing_exte nsions-4.1.1-py3-none-any.whl
Collecting zipp>=0.5 (from importlib-metadata; python_version < "3.8"->prettytable>=0.7->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 6f8e8ad/zipp-3.6.0- py3-none-any.whl
Installing collected packages: wcwidth, typing-extensions, zipp, importlib-metadata, prettytable, six, python-dateutil, ydiff, click , psutil, urllib3, PyYAML, dnspython, python-etcd, patroni
Running setup.py install for ydiff ... done
Running setup.py install for psutil ... done
Running setup.py install for PyYAML ... done
Running setup.py install for python-etcd ... done
Successfully installed PyYAML-6.0.1 click-8.0.4 dnspython-2.2.1 importlib-metadata-4.8.3 patroni-3.1.0 prettytable-2.5.0 psutil-5.9. 5 python-dateutil-2.8.2 python-etcd-0.4.5 six-1.16.0 typing-extensions-4.1.1 urllib3-1.26.16 wcwidth-0.2.6 ydiff-1.2 zipp-3.6.0
[root@node2 etcd]# pip3 install psycopg2-binary
WARNING: Running pip install with root privileges is generally not a good idea. Try `pip3 install --user` instead.
Collecting psycopg2-binary
Downloading https://files.pythonhosted.org/p ... 3a1a29f/psycopg2-bi nary-2.9.7.tar.gz (383kB)
100% |████████████████████████████████| 389kB 821kB/s
Installing collected packages: psycopg2-binary
Running setup.py install for psycopg2-binary ... done
Successfully installed psycopg2-binary-2.9.7
[root@node2 etcd]#
[root@node3 etcd]# yum install -y python3 python3-devel python3-pip gcc libpq-devel
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Package gcc-4.8.5-44.el7.x86_64 already installed and latest version
No package libpq-devel available.
Resolving Dependencies
--> Running transaction check
---> Package python3.x86_64 0:3.6.8-19.el7_9 will be installed
--> Processing Dependency: python3-libs(x86-64) = 3.6.8-19.el7_9 for package: python3-3.6.8-19.el7_9.x86_64
--> Processing Dependency: python3-setuptools for package: python3-3.6.8-19.el7_9.x86_64
--> Processing Dependency: libpython3.6m.so.1.0()(64bit) for package: python3-3.6.8-19.el7_9.x86_64
---> Package python3-devel.x86_64 0:3.6.8-19.el7_9 will be installed
--> Processing Dependency: redhat-rpm-config for package: python3-devel-3.6.8-19.el7_9.x86_64
--> Processing Dependency: python3-rpm-macros for package: python3-devel-3.6.8-19.el7_9.x86_64
--> Processing Dependency: python3-rpm-generators for package: python3-devel-3.6.8-19.el7_9.x86_64
--> Processing Dependency: python-rpm-macros for package: python3-devel-3.6.8-19.el7_9.x86_64
---> Package python3-pip.noarch 0:9.0.3-8.el7 will be installed
--> Running transaction check
---> Package python-rpm-macros.noarch 0:3-34.el7 will be installed
--> Processing Dependency: python-srpm-macros for package: python-rpm-macros-3-34.el7.noarch
---> Package python3-libs.x86_64 0:3.6.8-19.el7_9 will be installed
---> Package python3-rpm-generators.noarch 0:6-2.el7 will be installed
---> Package python3-rpm-macros.noarch 0:3-34.el7 will be installed
---> Package python3-setuptools.noarch 0:39.2.0-10.el7 will be installed
---> Package redhat-rpm-config.noarch 0:9.1.0-88.el7.centos will be installed
--> Processing Dependency: dwz >= 0.4 for package: redhat-rpm-config-9.1.0-88.el7.centos.noarch
--> Processing Dependency: perl-srpm-macros for package: redhat-rpm-config-9.1.0-88.el7.centos.noarch
--> Running transaction check
---> Package dwz.x86_64 0:0.11-3.el7 will be installed
---> Package perl-srpm-macros.noarch 0:1-8.el7 will be installed
---> Package python-srpm-macros.noarch 0:3-34.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================
Installing:
python3 x86_64 3.6.8-19.el7_9 updates 70 k
python3-devel x86_64 3.6.8-19.el7_9 updates 217 k
python3-pip noarch 9.0.3-8.el7 base 1.6 M
Installing for dependencies:
dwz x86_64 0.11-3.el7 base 99 k
perl-srpm-macros noarch 1-8.el7 base 4.6 k
python-rpm-macros noarch 3-34.el7 base 9.1 k
python-srpm-macros noarch 3-34.el7 base 8.8 k
python3-libs x86_64 3.6.8-19.el7_9 updates 6.9 M
python3-rpm-generators noarch 6-2.el7 base 20 k
python3-rpm-macros noarch 3-34.el7 base 8.1 k
python3-setuptools noarch 39.2.0-10.el7 base 629 k
redhat-rpm-config noarch 9.1.0-88.el7.centos base 81 k
Transaction Summary
====================================================================================================================================
Install 3 Packages (+9 Dependent packages)
Total download size: 9.7 M
Installed size: 48 M
Downloading packages:
(1/12): perl-srpm-macros-1-8.el7.noarch.rpm | 4.6 kB 00:00:00
(2/12): python-rpm-macros-3-34.el7.noarch.rpm | 9.1 kB 00:00:00
(3/12): dwz-0.11-3.el7.x86_64.rpm | 99 kB 00:00:00
(4/12): python-srpm-macros-3-34.el7.noarch.rpm | 8.8 kB 00:00:00
(5/12): python3-3.6.8-19.el7_9.x86_64.rpm | 70 kB 00:00:00
(6/12): python3-devel-3.6.8-19.el7_9.x86_64.rpm | 217 kB 00:00:00
(7/12): python3-rpm-generators-6-2.el7.noarch.rpm | 20 kB 00:00:00
(8/12): python3-libs-3.6.8-19.el7_9.x86_64.rpm | 6.9 MB 00:00:00
(9/12): python3-rpm-macros-3-34.el7.noarch.rpm | 8.1 kB 00:00:00
(10/12): python3-pip-9.0.3-8.el7.noarch.rpm | 1.6 MB 00:00:00
(11/12): python3-setuptools-39.2.0-10.el7.noarch.rpm | 629 kB 00:00:00
(12/12): redhat-rpm-config-9.1.0-88.el7.centos.noarch.rpm | 81 kB 00:00:00
------------------------------------------------------------------------------------------------------------------------------------
Total 8.3 MB/s | 9.7 MB 00:00:01
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : python3-setuptools-39.2.0-10.el7.noarch 1/12
Installing : python3-pip-9.0.3-8.el7.noarch 2/12
Installing : python3-libs-3.6.8-19.el7_9.x86_64 3/12
Installing : python3-3.6.8-19.el7_9.x86_64 4/12
Installing : python-srpm-macros-3-34.el7.noarch 5/12
Installing : python-rpm-macros-3-34.el7.noarch 6/12
Installing : python3-rpm-generators-6-2.el7.noarch 7/12
Installing : python3-rpm-macros-3-34.el7.noarch 8/12
Installing : dwz-0.11-3.el7.x86_64 9/12
Installing : perl-srpm-macros-1-8.el7.noarch 10/12
Installing : redhat-rpm-config-9.1.0-88.el7.centos.noarch 11/12
Installing : python3-devel-3.6.8-19.el7_9.x86_64 12/12
Verifying : python3-devel-3.6.8-19.el7_9.x86_64 1/12
Verifying : python3-rpm-generators-6-2.el7.noarch 2/12
Verifying : perl-srpm-macros-1-8.el7.noarch 3/12
Verifying : python3-3.6.8-19.el7_9.x86_64 4/12
Verifying : python-rpm-macros-3-34.el7.noarch 5/12
Verifying : dwz-0.11-3.el7.x86_64 6/12
Verifying : python3-rpm-macros-3-34.el7.noarch 7/12
Verifying : python3-setuptools-39.2.0-10.el7.noarch 8/12
Verifying : python3-pip-9.0.3-8.el7.noarch 9/12
Verifying : python-srpm-macros-3-34.el7.noarch 10/12
Verifying : python3-libs-3.6.8-19.el7_9.x86_64 11/12
Verifying : redhat-rpm-config-9.1.0-88.el7.centos.noarch 12/12
Installed:
python3.x86_64 0:3.6.8-19.el7_9 python3-devel.x86_64 0:3.6.8-19.el7_9 python3-pip.noarch 0:9.0.3-8.el7
Dependency Installed:
dwz.x86_64 0:0.11-3.el7 perl-srpm-macros.noarch 0:1-8.el7 python-rpm-macros.noarch 0:3-34.el7
python-srpm-macros.noarch 0:3-34.el7 python3-libs.x86_64 0:3.6.8-19.el7_9 python3-rpm-generators.noarch 0:6-2.el7
python3-rpm-macros.noarch 0:3-34.el7 python3-setuptools.noarch 0:39.2.0-10.el7 redhat-rpm-config.noarch 0:9.1.0-88.el7.centos
Complete!
[root@node3 etcd]# echo $LD_LIBRARY_PATH
[root@node3 etcd]# export PGPORT=5432
[root@node3 etcd]# export PGUSER=postgres
[root@node3 etcd]# export PGHOME=/opt/pgsql
[root@node3 etcd]# export PGDATA=/opt/pgdata
[root@node3 etcd]# export LD_LIBRARY_PATH=$PGHOME/lib
[root@node3 etcd]# export PATH=$PGHOME/bin:$PATH
[root@node3 etcd]# pip3 install patroni[etcd]
WARNING: Running pip install with root privileges is generally not a good idea. Try `pip3 install --user` instead.
Collecting patroni[etcd]
Downloading https://files.pythonhosted.org/p ... d49f714/patroni-3.1 .0-py3-none-any.whl (286kB)
100% |████████████████████████████████| 286kB 3.6MB/s
Collecting urllib3!=1.21,>=1.19.1 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 7728471/urllib3-1.2 6.16-py2.py3-none-any.whl (143kB)
100% |████████████████████████████████| 143kB 7.6MB/s
Collecting PyYAML (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... be1eda0/PyYAML-6.0. 1.tar.gz (125kB)
100% |████████████████████████████████| 133kB 7.5MB/s
Collecting python-dateutil (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 342a56d/python_date util-2.8.2-py2.py3-none-any.whl (247kB)
100% |████████████████████████████████| 256kB 5.5MB/s
Collecting prettytable>=0.7 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 6168b4c/prettytable -2.5.0-py3-none-any.whl
Collecting ydiff>=1.2.0 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 583fce4/ydiff-1.2.t ar.gz (42kB)
100% |████████████████████████████████| 51kB 13.1MB/s
Collecting click>=4.1 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 1696d7d/click-8.0.4 -py3-none-any.whl (97kB)
100% |████████████████████████████████| 102kB 13.1MB/s
Collecting psutil>=2.0.0 (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... cfc2c07/psutil-5.9. 5.tar.gz (493kB)
100% |████████████████████████████████| 501kB 4.1MB/s
Collecting python-etcd<0.5,>=0.4.3; extra == "etcd" (from patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 821ab41/python-etcd -0.4.5.tar.gz
Collecting six>=1.5 (from python-dateutil->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 91daf11/six-1.16.0- py2.py3-none-any.whl
Collecting wcwidth (from prettytable>=0.7->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... aa83f11/wcwidth-0.2 .6-py2.py3-none-any.whl
Collecting importlib-metadata; python_version < "3.8" (from prettytable>=0.7->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... d68f4ce/importlib_m etadata-4.8.3-py3-none-any.whl
Collecting dnspython>=1.13.0 (from python-etcd<0.5,>=0.4.3; extra == "etcd"->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 337cc35/dnspython-2 .2.1-py3-none-any.whl (269kB)
100% |████████████████████████████████| 276kB 6.7MB/s
Collecting zipp>=0.5 (from importlib-metadata; python_version < "3.8"->prettytable>=0.7->patroni[etcd])
Downloading https://files.pythonhosted.org/p ... 6f8e8ad/zipp-3.6.0- py3-none-any.whl
Collecting typing-extensions>=3.6.4; python_version < "3.8" (from importlib-metadata; python_version < "3.8"->prettytable>=0.7->patr oni[etcd])
Downloading https://files.pythonhosted.org/p ... ffd3a0e/typing_exte nsions-4.1.1-py3-none-any.whl
Installing collected packages: urllib3, PyYAML, six, python-dateutil, wcwidth, zipp, typing-extensions, importlib-metadata, prettyta ble, ydiff, click, psutil, dnspython, python-etcd, patroni
Running setup.py install for PyYAML ... done
Running setup.py install for ydiff ... done
Running setup.py install for psutil ... done
Running setup.py install for python-etcd ... done
Successfully installed PyYAML-6.0.1 click-8.0.4 dnspython-2.2.1 importlib-metadata-4.8.3 patroni-3.1.0 prettytable-2.5.0 psutil-5.9. 5 python-dateutil-2.8.2 python-etcd-0.4.5 six-1.16.0 typing-extensions-4.1.1 urllib3-1.26.16 wcwidth-0.2.6 ydiff-1.2 zipp-3.6.0
[root@node3 etcd]# pip3 install psycopg2-binary
WARNING: Running pip install with root privileges is generally not a good idea. Try `pip3 install --user` instead.
Collecting psycopg2-binary
Downloading https://files.pythonhosted.org/p ... 3a1a29f/psycopg2-bi nary-2.9.7.tar.gz (383kB)
100% |████████████████████████████████| 389kB 861kB/s
Installing collected packages: psycopg2-binary
Running setup.py install for psycopg2-binary ... done
Successfully installed psycopg2-binary-2.9.7
[root@node3 etcd]#
配置patroni
mkdir -p /etc/patroni/
cd /etc/patroni/
cat >> patroni.yml << EOF
scope: pg_cluster
namespace: /service/
name: pg1
restapi:
listen: 0.0.0.0:8008
connect_address: 192.168.17.20:8008
etcd:
hosts: 192.168.17.20:2379,192.168.17.21:2379,192.168.17.22:2379
bootstrap:
dcs:
ttl: 30
loop_wait: 10
retry_timeout: 10
maximum_lag_on_failover: 1048576
postgresql:
use_pg_rewind: true
use_slots: true
parameters:
initdb:
- encoding: UTF8
- data-checksums
pg_hba:
- host replication replicator 127.0.0.1/32 md5
- host replication replicator 192.168.17.20/32 md5
- host replication replicator 192.168.17.21/32 md5
- host replication replicator 192.168.17.22/32 md5
- host all all 0.0.0.0/0 md5
users:
admin:
password: admin
options:
- createrole
- createdb
postgresql:
listen: 192.168.17.20:5432
connect_address: 192.168.17.20:5432
data_dir: /opt/pgdata
bin_dir: /opt/pgsql/bin
pgpass: /tmp/pgpass
authentication:
replication:
username: replicator
password: replicator
superuser:
username: postgres
password: postgres
watchdog:
mode: required
device: /dev/watchdog
safety_margin: 5
tags:
nofailover: false
noloadbalance: false
clonefrom: false
nosync: false
EOF
cat >> /etc/systemd/system/patroni.service << EOF
[Unit]
Description=patroni - a high-availability PostgreSQL
Documentation=https://patroni.readthedocs.io/en/latest/index.html
After=syslog.target network.target etcd.target
Wants=network-online.target
[Service]
Type=simple
User=postgres
Group=postgres
PermissionsStartOnly=true
Environment="LD_LIBRARY_PATH=/opt/pgsql/lib"
ExecStart=/usr/local/bin/patroni /etc/patroni/patroni.yml
ExecReload=/bin/kill -HUP $MAINPID
LimitNOFILE=65536
KillMode=process
KillSignal=SIGINT
Restart=on-abnormal
RestartSec=30s
TimeoutSec=0
[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload
systemctl start patroni.service
systemctl status patroni.service
su - postgres
patronictl -c /etc/patroni/patroni.yml list
3台机器都要操作，注意patroni.yml每个节点的IP地址和name都要修改
[root@node1 etcd]# mkdir -p /etc/patroni/
[root@node1 etcd]# cd /etc/patroni/
[root@node1 patroni]# cat >> patroni.yml << EOF
> scope: pg_cluster
> namespace: /service/
> name: pg1
>
> restapi:
> listen: 0.0.0.0:8008
> connect_address: 192.168.17.20:8008
>
> etcd:
> hosts: 192.168.17.20:2379,192.168.17.21:2379,192.168.17.22:2379
>
> bootstrap:
> dcs:
> ttl: 30
> loop_wait: 10
> retry_timeout: 10
> maximum_lag_on_failover: 1048576
> postgresql:
> use_pg_rewind: true
> use_slots: true
> parameters:
>
> initdb:
> - encoding: UTF8
> - data-checksums
>
> pg_hba:
> - host replication replicator 127.0.0.1/32 md5
> - host replication replicator 192.168.17.20/32 md5
> - host replication replicator 192.168.17.21/32 md5
> - host replication replicator 192.168.17.22/32 md5
> - host all all 0.0.0.0/0 md5
>
> users:
> admin:
> password: admin
> options:
> - createrole
> - createdb
>
> postgresql:
> listen: 192.168.17.20:5432
> connect_address: 192.168.17.20:5432
> data_dir: /opt/pgdata
> bin_dir: /opt/pgsql/bin
> pgpass: /tmp/pgpass
> authentication:
> replication:
> username: replicator
> password: replicator
> superuser:
> username: postgres
> password: postgres
>
> watchdog:
> mode: required
> device: /dev/watchdog
> safety_margin: 5
>
> tags:
> nofailover: false
> noloadbalance: false
> clonefrom: false
> nosync: false
>
> EOF
[root@node1 patroni]# cat >> /etc/systemd/system/patroni.service << EOF
> [Unit]
> Description=patroni - a high-availability PostgreSQL
> Documentation=https://patroni.readthedocs.io/en/latest/index.html
> After=syslog.target network.target etcd.target
> Wants=network-online.target
>
> [Service]
> Type=simple
> User=postgres
> Group=postgres
> PermissionsStartOnly=true
> Environment="LD_LIBRARY_PATH=/opt/pgsql/lib"
> ExecStart=/usr/local/bin/patroni /etc/patroni/patroni.yml
> ExecReload=/bin/kill -HUP $MAINPID
> LimitNOFILE=65536
> KillMode=process
> KillSignal=SIGINT
> Restart=on-abnormal
> RestartSec=30s
> TimeoutSec=0
>
> [Install]
> WantedBy=multi-user.target
>
> EOF
[root@node1 patroni]# systemctl daemon-reload
[root@node1 patroni]# systemctl start patroni.service
[root@node1 patroni]# systemctl status patroni.service
● patroni.service - patroni - a high-availability PostgreSQL
Loaded: loaded (/etc/systemd/system/patroni.service; disabled; vendor preset: disabled)
Active: active (running) since Fri 2023-09-08 23:38:02 CST; 41s ago
Docs: https://patroni.readthedocs.io/en/latest/index.html
Main PID: 14038 (patroni)
Tasks: 15
CGroup: /system.slice/patroni.service
├─14038 /usr/bin/python3 /usr/local/bin/patroni /etc/patroni/patroni.yml
├─14079 /opt/pgsql/bin/postgres -D /opt/pgdata --config-file=/opt/pgdata/postgresql.conf --listen_addresses=192.168.17.20 --port=5432 --cluster_name=pg_cluster --wal_level=replica --hot_standby=on --max_connections=100 --max_wal_senders=10 --max_prepared_...
├─14081 postgres: pg_cluster: checkpointer
├─14082 postgres: pg_cluster: background writer
├─14083 postgres: pg_cluster: walwriter
├─14084 postgres: pg_cluster: autovacuum launcher
├─14085 postgres: pg_cluster: stats collector
├─14086 postgres: pg_cluster: logical replication launcher
├─14091 postgres: pg_cluster: postgres postgres 192.168.17.20(46620) idle
├─14103 postgres: pg_cluster: walsender replicator 192.168.17.21(47634) streaming 0/4000060
└─14104 postgres: pg_cluster: walsender replicator 192.168.17.22(48736) streaming 0/4000060
Sep 08 23:38:09 node1 patroni[14038]: 2023-09-08 23:38:09.964 CST [14097] STATEMENT: START_REPLICATION SLOT "pg2" 0/3000000 TIMELINE 1
Sep 08 23:38:09 node1 patroni[14038]: 2023-09-08 23:38:09.971 CST [14098] ERROR: replication slot "pg2" does not exist
Sep 08 23:38:09 node1 patroni[14038]: 2023-09-08 23:38:09.971 CST [14098] STATEMENT: START_REPLICATION SLOT "pg2" 0/3000000 TIMELINE 1
Sep 08 23:38:12 node1 patroni[14038]: 2023-09-08 23:38:12.418 CST [14101] ERROR: replication slot "pg3" does not exist
Sep 08 23:38:12 node1 patroni[14038]: 2023-09-08 23:38:12.418 CST [14101] STATEMENT: START_REPLICATION SLOT "pg3" 0/4000000 TIMELINE 1
Sep 08 23:38:12 node1 patroni[14038]: 2023-09-08 23:38:12.425 CST [14102] ERROR: replication slot "pg3" does not exist
Sep 08 23:38:12 node1 patroni[14038]: 2023-09-08 23:38:12.425 CST [14102] STATEMENT: START_REPLICATION SLOT "pg3" 0/4000000 TIMELINE 1
Sep 08 23:38:14 node1 patroni[14038]: 2023-09-08 23:38:14,847 INFO: no action. I am (pg1), the leader with the lock
Sep 08 23:38:24 node1 patroni[14038]: 2023-09-08 23:38:24,844 INFO: no action. I am (pg1), the leader with the lock
Sep 08 23:38:34 node1 patroni[14038]: 2023-09-08 23:38:34,842 INFO: no action. I am (pg1), the leader with the lock
[root@node1 patroni]# su - postgres
Last login: Fri Sep 8 23:14:26 CST 2023 on pts/1
[postgres@node1 ~]$ patronictl -c /etc/patroni/patroni.yml list
+ Cluster: pg_cluster ---+---------+-----------+----+-----------+
| Member | Host | Role | State | TL | Lag in MB |
+--------+---------------+---------+-----------+----+-----------+
| pg1 | 192.168.17.20 | Leader | running | 1 | |
| pg2 | 192.168.17.21 | Replica | streaming | 1 | 0 |
| pg3 | 192.168.17.22 | Replica | streaming | 1 | 0 |
+--------+---------------+---------+-----------+----+-----------+
[postgres@node1 ~]$
[root@node2 etcd]# mkdir -p /etc/patroni/
[root@node2 etcd]# cd /etc/patroni/
[root@node2 patroni]# cat >> patroni.yml << EOF
> scope: pg_cluster
> namespace: /service/
> name: pg2
>
> restapi:
> listen: 0.0.0.0:8008
> connect_address: 192.168.17.21:8008
>
> etcd:
> hosts: 192.168.17.20:2379,192.168.17.21:2379,192.168.17.22:2379
>
> bootstrap:
> dcs:
> ttl: 30
> loop_wait: 10
> retry_timeout: 10
> maximum_lag_on_failover: 1048576
> postgresql:
> use_pg_rewind: true
> use_slots: true
> parameters:
>
> initdb:
> - encoding: UTF8
> - data-checksums
>
> pg_hba:
> - host replication replicator 127.0.0.1/32 md5
> - host replication replicator 192.168.17.20/32 md5
> - host replication replicator 192.168.17.21/32 md5
> - host replication replicator 192.168.17.22/32 md5
> - host all all 0.0.0.0/0 md5
>
> users:
> admin:
> password: admin
> options:
> - createrole
> - createdb
>
> postgresql:
> listen: 192.168.17.21:5432
> connect_address: 192.168.17.21:5432
> data_dir: /opt/pgdata
> bin_dir: /opt/pgsql/bin
> pgpass: /tmp/pgpass
> authentication:
> replication:
> username: replicator
> password: replicator
> superuser:
> username: postgres
> password: postgres
>
> watchdog:
> mode: required
> device: /dev/watchdog
> safety_margin: 5
>
> tags:
> nofailover: false
> noloadbalance: false
> clonefrom: false
> nosync: false
>
> EOF
[root@node2 patroni]#
[root@node2 patroni]# cat >> /etc/systemd/system/patroni.service << EOF
> [Unit]
> Description=patroni - a high-availability PostgreSQL
> Documentation=https://patroni.readthedocs.io/en/latest/index.html
> After=syslog.target network.target etcd.target
> Wants=network-online.target
>
> [Service]
> Type=simple
> User=postgres
> Group=postgres
> PermissionsStartOnly=true
> Environment="LD_LIBRARY_PATH=/opt/pgsql/lib"
> ExecStart=/usr/local/bin/patroni /etc/patroni/patroni.yml
> ExecReload=/bin/kill -HUP $MAINPID
> LimitNOFILE=65536
> KillMode=process
> KillSignal=SIGINT
> Restart=on-abnormal
> RestartSec=30s
> TimeoutSec=0
>
> [Install]
> WantedBy=multi-user.target
>
> EOF
[root@node2 patroni]#
[root@node2 patroni]# systemctl daemon-reload
[root@node2 patroni]# systemctl start patroni.service
[root@node2 patroni]# systemctl status patroni.service
● patroni.service - patroni - a high-availability PostgreSQL
Loaded: loaded (/etc/systemd/system/patroni.service; disabled; vendor preset: disabled)
Active: active (running) since Fri 2023-09-08 23:38:08 CST; 48s ago
Docs: https://patroni.readthedocs.io/en/latest/index.html
Main PID: 66290 (patroni)
Tasks: 12
CGroup: /system.slice/patroni.service
├─66290 /usr/bin/python3 /usr/local/bin/patroni /etc/patroni/patroni.yml
├─66330 /opt/pgsql/bin/postgres -D /opt/pgdata --config-file=/opt/pgdata/postgresql.conf --listen_addresses=192.168.17.21 --port=5432 --cluster_name=pg_cluster --wal_level=replica --hot_standby=on --max_connections=100 --max_wal_senders=10 --max_prepared_...
├─66332 postgres: pg_cluster: startup recovering 000000010000000000000004
├─66336 postgres: pg_cluster: checkpointer
├─66337 postgres: pg_cluster: background writer
├─66338 postgres: pg_cluster: stats collector
├─66344 postgres: pg_cluster: postgres postgres 192.168.17.21(33360) idle
└─66346 postgres: pg_cluster: walreceiver streaming 0/4000060
Sep 08 23:38:10 node2 patroni[66290]: 192.168.17.21:5432 - accepting connections
Sep 08 23:38:10 node2 patroni[66290]: 2023-09-08 23:38:10,678 INFO: Lock owner: pg1; I am pg2
Sep 08 23:38:10 node2 patroni[66290]: 2023-09-08 23:38:10,678 INFO: establishing a new patroni connection to the postgres cluster
Sep 08 23:38:10 node2 patroni[66290]: 2023-09-08 23:38:10,695 INFO: no action. I am (pg2), a secondary, and following a leader (pg1)
Sep 08 23:38:14 node2 patroni[66290]: 2023-09-08 23:38:14,564 INFO: no action. I am (pg2), a secondary, and following a leader (pg1)
Sep 08 23:38:14 node2 patroni[66290]: 2023-09-08 23:38:14.698 CST [66346] LOG: started streaming WAL from primary at 0/3000000 on timeline 1
Sep 08 23:38:24 node2 patroni[66290]: 2023-09-08 23:38:24,563 INFO: no action. I am (pg2), a secondary, and following a leader (pg1)
Sep 08 23:38:34 node2 patroni[66290]: 2023-09-08 23:38:34,563 INFO: no action. I am (pg2), a secondary, and following a leader (pg1)
Sep 08 23:38:44 node2 patroni[66290]: 2023-09-08 23:38:44,562 INFO: no action. I am (pg2), a secondary, and following a leader (pg1)
Sep 08 23:38:54 node2 patroni[66290]: 2023-09-08 23:38:54,562 INFO: no action. I am (pg2), a secondary, and following a leader (pg1)
[root@node2 patroni]#
[root@node3 etcd]# mkdir -p /etc/patroni/
[root@node3 etcd]# cd /etc/patroni/
[root@node3 patroni]# cat >> patroni.yml << EOF
> scope: pg_cluster
> namespace: /service/
> name: pg3
>
> restapi:
> listen: 0.0.0.0:8008
> connect_address: 192.168.17.22:8008
>
> etcd:
> hosts: 192.168.17.20:2379,192.168.17.21:2379,192.168.17.22:2379
>
> bootstrap:
> dcs:
> ttl: 30
> loop_wait: 10
> retry_timeout: 10
> maximum_lag_on_failover: 1048576
> postgresql:
> use_pg_rewind: true
> use_slots: true
> parameters:
>
> initdb:
> - encoding: UTF8
> - data-checksums
>
> pg_hba:
> - host replication replicator 127.0.0.1/32 md5
> - host replication replicator 192.168.17.20/32 md5
> - host replication replicator 192.168.17.21/32 md5
> - host replication replicator 192.168.17.22/32 md5
> - host all all 0.0.0.0/0 md5
>
> users:
> admin:
> password: admin
> options:
> - createrole
> - createdb
>
> postgresql:
> listen: 192.168.17.22:5432
> connect_address: 192.168.17.22:5432
> data_dir: /opt/pgdata
> bin_dir: /opt/pgsql/bin
> pgpass: /tmp/pgpass
> authentication:
> replication:
> username: replicator
> password: replicator
> superuser:
> username: postgres
> password: postgres
>
> watchdog:
> mode: required
> device: /dev/watchdog
> safety_margin: 5
>
> tags:
> nofailover: false
> noloadbalance: false
> clonefrom: false
> nosync: false
>
> EOF
[root@node3 patroni]#
[root@node3 patroni]# cat >> /etc/systemd/system/patroni.service << EOF
> [Unit]
> Description=patroni - a high-availability PostgreSQL
> Documentation=https://patroni.readthedocs.io/en/latest/index.html
> After=syslog.target network.target etcd.target
> Wants=network-online.target
>
> [Service]
> Type=simple
> User=postgres
> Group=postgres
> PermissionsStartOnly=true
> Environment="LD_LIBRARY_PATH=/opt/pgsql/lib"
> ExecStart=/usr/local/bin/patroni /etc/patroni/patroni.yml
> ExecReload=/bin/kill -HUP $MAINPID
> LimitNOFILE=65536
> KillMode=process
> KillSignal=SIGINT
> Restart=on-abnormal
> RestartSec=30s
> TimeoutSec=0
>
> [Install]
> WantedBy=multi-user.target
>
> EOF
[root@node3 patroni]#
[root@node3 patroni]# systemctl daemon-reload
[root@node3 patroni]# systemctl start patroni.service
[root@node3 patroni]# systemctl status patroni.service
● patroni.service - patroni - a high-availability PostgreSQL
Loaded: loaded (/etc/systemd/system/patroni.service; disabled; vendor preset: disabled)
Active: active (running) since Fri 2023-09-08 23:38:11 CST; 49s ago
Docs: https://patroni.readthedocs.io/en/latest/index.html
Main PID: 66275 (patroni)
Tasks: 12
CGroup: /system.slice/patroni.service
├─66275 /usr/bin/python3 /usr/local/bin/patroni /etc/patroni/patroni.yml
├─66315 /opt/pgsql/bin/postgres -D /opt/pgdata --config-file=/opt/pgdata/postgresql.conf --listen_addresses=192.168.17.22 --port=5432 --cluster_name=pg_cluster --wal_level=replica --hot_standby=on --max_connections=100 --max_wal_senders=10 --max_prepared_...
├─66316 postgres: pg_cluster: startup recovering 000000010000000000000004
├─66317 postgres: pg_cluster: checkpointer
├─66318 postgres: pg_cluster: background writer
├─66319 postgres: pg_cluster: stats collector
├─66327 postgres: pg_cluster: postgres postgres 192.168.17.22(60362) idle
└─66337 postgres: pg_cluster: walreceiver streaming 0/4000060
Sep 08 23:38:12 node3 patroni[66275]: 2023-09-08 23:38:12,158 INFO: Lock owner: pg1; I am pg3
Sep 08 23:38:12 node3 patroni[66275]: 2023-09-08 23:38:12,159 INFO: establishing a new patroni connection to the postgres cluster
Sep 08 23:38:12 node3 patroni[66275]: 2023-09-08 23:38:12.163 CST [66326] FATAL: could not start WAL streaming: ERROR: replication slot "pg3" does not exist
Sep 08 23:38:12 node3 patroni[66275]: 2023-09-08 23:38:12,177 INFO: no action. I am (pg3), a secondary, and following a leader (pg1)
Sep 08 23:38:14 node3 patroni[66275]: 2023-09-08 23:38:14,594 INFO: no action. I am (pg3), a secondary, and following a leader (pg1)
Sep 08 23:38:17 node3 patroni[66275]: 2023-09-08 23:38:17.170 CST [66337] LOG: started streaming WAL from primary at 0/4000000 on timeline 1
Sep 08 23:38:24 node3 patroni[66275]: 2023-09-08 23:38:24,593 INFO: no action. I am (pg3), a secondary, and following a leader (pg1)
Sep 08 23:38:34 node3 patroni[66275]: 2023-09-08 23:38:34,593 INFO: no action. I am (pg3), a secondary, and following a leader (pg1)
Sep 08 23:38:44 node3 patroni[66275]: 2023-09-08 23:38:44,592 INFO: no action. I am (pg3), a secondary, and following a leader (pg1)
Sep 08 23:38:54 node3 patroni[66275]: 2023-09-08 23:38:54,592 INFO: no action. I am (pg3), a secondary, and following a leader (pg1)
[root@node3 patroni]#
至此安装patroni+etcd过程已经完成
测试
手动切换测试
在守护者集群中，当领导节点因意外原因不可用时，会自动执行故障转移。如果要手动测试守护者集群故障转移，可以使用以下命令启动到副本节点的故障转移
su - postgres
#查询当前集群状态
patronictl -c /etc/patroni/patroni.yml list
#手动切换，选择新的领导节点
patronictl -c /etc/patroni/patroni.yml failover
#再次查询当前集群状态
patronictl -c /etc/patroni/patroni.yml list
测试如下：
[root@node1 patroni]# su - postgres
Last login: Fri Sep 8 23:39:48 CST 2023 on pts/0
[postgres@node1 ~]$ patronictl -c /etc/patroni/patroni.yml list
+ Cluster: pg_cluster ---+---------+-----------+----+-----------+
| Member | Host | Role | State | TL | Lag in MB |
+--------+---------------+---------+-----------+----+-----------+
| pg1 | 192.168.17.20 | Leader | running | 1 | |
| pg2 | 192.168.17.21 | Replica | streaming | 1 | 0 |
| pg3 | 192.168.17.22 | Replica | streaming | 1 | 0 |
+--------+---------------+---------+-----------+----+-----------+
[postgres@node1 ~]$ patronictl -c /etc/patroni/patroni.yml failover
Current cluster topology
+ Cluster: pg_cluster ---+---------+-----------+----+-----------+
| Member | Host | Role | State | TL | Lag in MB |
+--------+---------------+---------+-----------+----+-----------+
| pg1 | 192.168.17.20 | Leader | running | 1 | |
| pg2 | 192.168.17.21 | Replica | streaming | 1 | 0 |
| pg3 | 192.168.17.22 | Replica | streaming | 1 | 0 |
+--------+---------------+---------+-----------+----+-----------+
Candidate ['pg2', 'pg3'] []: pg2
Are you sure you want to failover cluster pg_cluster, demoting current leader pg1? [y/N]: y
2023-09-08 23:49:23.31022 Successfully failed over to "pg2"
+ Cluster: pg_cluster ---+---------+-----------+----+-----------+
| Member | Host | Role | State | TL | Lag in MB |
+--------+---------------+---------+-----------+----+-----------+
| pg1 | 192.168.17.20 | Replica | stopped | | unknown |
| pg2 | 192.168.17.21 | Leader | running | 1 | |
| pg3 | 192.168.17.22 | Replica | streaming | 1 | 0 |
+--------+---------------+---------+-----------+----+-----------+
[postgres@node1 ~]$ patronictl -c /etc/patroni/patroni.yml list
+ Cluster: pg_cluster ---+---------+-----------+----+-----------+
| Member | Host | Role | State | TL | Lag in MB |
+--------+---------------+---------+-----------+----+-----------+
| pg1 | 192.168.17.20 | Replica | streaming | 2 | 0 |
| pg2 | 192.168.17.21 | Leader | running | 2 | |
| pg3 | 192.168.17.22 | Replica | streaming | 2 | 0 |
+--------+---------------+---------+-----------+----+-----------+
[postgres@node1 ~]$
查询所有历史的切换操作
[postgres@node1 ~]$ patronictl -c /etc/patroni/patroni.yml history
+----+----------+------------------------------+----------------------------------+------------+
| TL | LSN | Reason | Timestamp | New Leader |
+----+----------+------------------------------+----------------------------------+------------+
| 1 | 67109488 | no recovery target specified | 2023-09-08T23:49:22.321969+08:00 | pg2 |
+----+----------+------------------------------+----------------------------------+------------+
[postgres@node1 ~]$
测试同步
创建数据库testdb，在testdb里创建表t，查询从库是否同步
[postgres@node1 ~]$ psql -h node2
Password for user postgres:
psql (14.9)
Type "help" for help.
postgres=# create database testdb;
CREATE DATABASE
postgres=# \c testdb
You are now connected to database "testdb" as user "postgres".
testdb=# create table t (id int);
CREATE TABLE
testdb=# insert into t values(1),(2),(3);
INSERT 0 3
testdb=# select * from t;
id
----
1
2
3
(3 rows)
testdb=# \q
[postgres@node1 ~]$ psql -h node3 -d testdb -c "select * from t;"
Password for user postgres:
id
----
1
2
3
(3 rows)
[postgres@node1 ~]$
|
|手机版|小黑屋|重庆思庄Oracle、Redhat认证学习论坛
( 渝ICP备12004239号-4 )
发表于 2026-1-25 18:29:41
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
收藏
支持
反对