OPatchauto session is initiated at Tue Apr 16 21:22:25 2024
System initialization log file is /u01/app/19.12.0/grid/cfgtoollogs/opatchautodb/systemconfig2024-04-16_09-22-28PM.log.
Session log file is /u01/app/19.12.0/grid/cfgtoollogs/opatchauto/opatchauto2024-04-16_09-22-31PM.log
The id for this session is YDIF
Executing OPatch prereq operations to verify patch applicability on home /u01/app/19.12.0/grid
Patch applicability verified successfully on home /u01/app/19.12.0/grid
Executing patch validation checks on home /u01/app/19.12.0/grid
Patch validation checks successfully completed on home /u01/app/19.12.0/grid
Performing prepatch operations on CRS - bringing down CRS service on home /u01/app/19.12.0/grid
Prepatch operation log file location: /u01/app/grid/crsdata/hisce/crsconfig/hapatch_2024-04-16_09-23-08PM.log
CRS service brought down successfully on home /u01/app/19.12.0/grid
Start applying binary patch on home /u01/app/19.12.0/grid
Failed while applying binary patches on home /u01/app/19.12.0/grid
Execution of [OPatchAutoBinaryAction] patch action failed, check log for more details. Failures:
Patch Target : hisce->/u01/app/19.12.0/grid Type[siha]
Details: [
---------------------------Patching Failed---------------------------------
Command execution failed during patching in home: /u01/app/19.12.0/grid, host: hisce.
Command failed: /u01/app/19.12.0/grid/OPatch/opatchauto apply /setup/32895426 -oh /u01/app/19.12.0/grid -target_type has -binary -invPtrLoc /u01/app/19.12.0/grid/oraInst.loc -jre /u01/app/19.12.0/grid/OPatch/jre -persistresult /u01/app/19.12.0/grid/opatchautocfg/db/sessioninfo/sessionresult_hisce_siha_1.ser -analyzedresult /u01/app/19.12.0/grid/opatchautocfg/db/sessioninfo/sessionresult_analyze_hisce_siha_1.ser
Command failure output:
==Following patches FAILED in apply:
Patch: /setup/32895426/32916816
Log: /u01/app/19.12.0/grid/cfgtoollogs/opatchauto/core/opatch/opatch2024-04-16_21-23-21PM_1.log
Reason: Failed during Analysis: CheckPatchApplicable Failed, [ Prerequisite Status: FAILED, Prerequisite output:
The details are:
Patch 32916816:
Copy Action: Source File "/setup/32895426/32916816/files/bin/ocrcheck.bin" does not exists or is not readable
'oracle.has.crs, 19.0.0.0.0': Cannot copy file from 'ocrcheck.bin' to '/u01/app/19.12.0/grid/bin/ocrcheck.bin'
Copy Action: Source File "/setup/32895426/32916816/files/bin/ocrconfig.bin" does not exists or is not readable
'oracle.has.crs, 19.0.0.0.0' ...
After fixing the cause of failure Run opatchauto resume
]
OPATCHAUTO-68061: The orchestration engine failed.
OPATCHAUTO-68061: The orchestration engine failed with return code 1
OPATCHAUTO-68061: Check the log for more details.
OPatchAuto failed.
OPatchauto session completed at Tue Apr 16 21:23:35 2024
Time taken to complete the session 1 minute, 10 seconds
opatchauto failed with error code 42
mos方案:
[root@hisce install]# /u01/app/19.12.0/grid/crs/install/rootcrs.sh –prepatch
Invalid option –prepatch
rootcrs.sh [-verbose] [-upgrade ] [-checkcrsentities <yes|no>]
[-paramfile <parameter_file>]
[-deconfig [-deinstall] [-keepdg] [-lastnode] | -downgrade [-ocrbackupfile <OCR_backup_file>] [-online]] [-force]
[-unlock | -lock [-crshome <path_to_CRS_home>]]
[[-prepatch [-cleanpids] | -postpatch] [-norestart] [-nonrolling] [-rollback]] [-dstcrshome <destination_patch_home>]
[-join -existingnode <node_name>]
[-move -dstcrshome <path to CRS home>]
[-converttoextended [-first -sites <sites list>] -site <node site>]
[-convertcluster <conversion type> -manifestfile <manifest file> [-lastnode]]
[-init] [-first -force] [-cleansockets]
Options:
-verbose Run this script in verbose mode.
-upgrade Oracle HA is being upgraded from previous version.
-lock Lock CRS home.
-paramfile Complete path of file specifying HA parameter values
-lastnode Force the node this is executing on to be considered the last node of the deconfiguration and perform actions associated with deconfiguring the last node.
-downgrade Downgrade Oracle Clusterware.
-deconfig Remove Oracle Clusterware to allow it to be uninstalled or reinstalled.
-deinstall Reset the permissions on CRS home during deconfiguration.
-keepdg Keep existing diskgroups during deconfiguration.
-force Force the execution of steps in install or delete that cannot be verified to be safe.
-unlock Unlock CRS home.
-crshome Complete path of CRS home.
-prepatch Perform required steps before the Oracle patching tool (Opatch) is invoked.
-cleanpids Terminate Oracle Clusterware active processes. Must use with -prepatch option.
-postpatch Perform required steps after the Oracle patching tool (Opatch) is invoked.
-nonrolling Perform steps for -prepatch and -postpatch in a non-rolling fashion.
-norestart Leave Oracle Clusterware stack stack down after patching.
-rollback Perform steps specific to rollback for -prepatch and -postpatch.
-dstcrshome Complete path of CRS home for out-of-place patching only
-join Add the local node to an upgraded cluster.
-existingnode An already upgraded cluster node. Must use with join option.
-init Reset the permissions of the files and directories in the GI home that are modified by root.sh.
-ocrbackupfile Restore OCR with the given OCR backup file.
-first Force a node other than the installer node as the first node, during install or upgrade. Must use with -force option.
-cleansockets Remove socket files created by the Grid Infrastructure processes. Stop the GI stack if not already stopped (Option specific to Unix platform only).
-online Downgrade the cluster without bringing the stack down on all nodes. Must be used with -downgrade option.
-converttoextended Convert the cluster to an extended cluster.
-first -sites List of sites to add to the cluster configuration on the first node.
-site The site the local node is associated with.
-move Change the Oracle Grid Infrastructure home path. The new home location is specified by the -dstcrshome option.
-checkcrsentities If yes, only verify CRS entities before upgrade, do not upgrade. If no, skip verification and proceed to upgrade.
-updateosfiles Restore the GI configuration files stored in OS locations. Includes updating the drivers for ACFS and AFD.
-convertcluster The type of cluster conversion.
-manifestfile The manifest file to import ASM credential.
-extractclusterdata Extract the standalone cluster information.
-clusterinfodir The directory in which to store the cluster information files.
-createmc Create the manifest file for the member cluster on the domain server.
-convert Convert the Standalone Cluster to a Member Cluster.
-rollbacksc Roll back the standalone cluster conversion changes.
-rollbackdsc Roll back the domain services cluster conversion changes.
-member Member cluster name.
[root@hisce install]# /u01/app/19.12.0/grid/crs/install/rootcrs.sh -unlock
Using configuration parameter file: /u01/app/19.12.0/grid/crs/install/crsconfig_params
The log of current session can be found at:
/u01/app/grid/crsdata/hisce/crsconfig/crsunlock_hisce_2024-04-16_09-26-53PM.log
2024/04/16 21:26:54 CLSRSC-357: Failed to stop current Oracle Clusterware stack during upgrade
2024/04/16 21:26:54 CLSRSC-347: Successfully unlock /u01/app/19.12.0/grid
[root@hisce install]# /u01/app/19.12.0/grid/crs/install/rootcrs.sh -lock
Using configuration parameter file: /u01/app/19.12.0/grid/crs/install/crsconfig_params
The log of current session can be found at:
/u01/app/grid/crsdata/hisce/crsconfig/crslock_hisce_2024-04-16_09-26-59PM.log
2024/04/16 21:27:01 CLSRSC-329: Replacing Clusterware entries in file 'oracle-ohasd.service'